refactor(demos): build sample machine tools as GeneralXyzabcMachineTool

Follows the CodeXyzabcMachineTool retirement in HiMech. DemoBuildMachineTool
drops IGetCodeXyzabcMachineTool, which no longer exists, and spells out the
doc comments the inherited interface used to supply.

The two GenByFile<CodeXyzabcMachineTool> call sites are fixed rather than
merely renamed: they read Resource machine tools rooted at
<GeneralXyzabcMachineTool>, so the factory's `as` cast handed back null and
the demo project got no machining chain at all.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

Hi.Sample.csproj

@@ -11,7 +11,7 @@
 		</Description>
 		<Configurations>Debug;Release</Configurations>
 		<VersionBuild>0</VersionBuild>
-		<VersionPrefix>3.1.$(VersionBuild)</VersionPrefix>
+		<VersionPrefix>3.2.$(VersionBuild)</VersionPrefix>
 		<Product>$(AssemblyName)</Product>
 		<ApplicationIcon>techcoordinate.ico</ApplicationIcon>
 		<Copyright>Copyright 2025 Tech Coordinate Co., Ltd.</Copyright>
@@ -32,7 +32,7 @@
 		<ProjectReference Include="..\HiNc\HiNc.csproj" />
 	</ItemGroup>
 	<ItemGroup Condition="'$(Configuration)'=='Release'">
-		<PackageReference Include="HiNc" Version="3.1.*" />
+		<PackageReference Include="HiNc" Version="3.2.*" />
 	</ItemGroup>
 	
 </Project>

MachineTool/DemoBuildMachineTool.cs

@@ -15,13 +15,13 @@ using System.Xml.Linq;
 namespace Sample.MachineTool
 {
     /// <summary>
-    /// Provides access to the PMC-B1 machine tool model.
+    /// Provides access to the Table-B1 machine tool model.
     /// </summary>
     /// <remarks>
     /// ### Source Code
     /// [!code-csharp[SampleCode](~/../Hi.Sample/MachineTool/DemoBuildMachineTool.cs)]
     /// </remarks>
-    public class DemoBuildMachineTool : IGetCodeXyzabcMachineTool
+    public class DemoBuildMachineTool
     {
         /// <summary>
         /// Registers this type's deserializer with the given <see cref="XFactory"/>
@@ -37,7 +37,7 @@ namespace Sample.MachineTool
         /// Generates an XYZ-ABC machine tool instance from embedded resources.
         /// </summary>
         /// <returns>A configured machine tool model.</returns>
-        public static CodeXyzabcMachineTool GenXyzabcMachineTool()
+        public static GeneralXyzabcMachineTool GenXyzabcMachineTool()
         {
             CodeXyzabcChain chain = new CodeXyzabcChain("[O][Y][X][C][w];[O][Z][B][S][t]");
             if (chain.ToolBuckleTransformer is StaticTranslation st)
@@ -56,7 +56,7 @@ namespace Sample.MachineTool
             chain.AnchorToSolid.BuildAnchorToSolid(
                 chain.Asmb.GetDescendantAnchors(), solidMap);
 
-            CodeXyzabcMachineTool dst = new CodeXyzabcMachineTool(chain);
+            GeneralXyzabcMachineTool dst = new GeneralXyzabcMachineTool(chain);
             dst.GenerateCollisionIndexPairs();
             return dst;
         }
@@ -64,7 +64,7 @@ namespace Sample.MachineTool
         /// <summary>
         /// The cached machine tool instance.
         /// </summary>
-        CodeXyzabcMachineTool MachineTool { get; }
+        GeneralXyzabcMachineTool MachineTool { get; }
 
         /// <summary>
         /// Default constructor that initializes the machine tool model.
@@ -74,7 +74,6 @@ namespace Sample.MachineTool
             MachineTool = GenXyzabcMachineTool();
         }
         #region XML IO
-        //public PmcB1MachineToolSource(XElement src, object res) : this() { }
         /// <summary>
         /// XML element name for serialization.
         /// </summary>
@@ -82,9 +81,15 @@ namespace Sample.MachineTool
         /// <inheritdoc/>
         public XElement ToXElement() => new XElement(XName);
         #endregion
-        /// <inheritdoc/>
-        public CodeXyzabcMachineTool GetXyzabcMachineTool() => MachineTool;
-        /// <inheritdoc/>
+        /// <summary>
+        /// Gets the built machine tool.
+        /// </summary>
+        /// <returns>Machine tool.</returns>
+        public GeneralXyzabcMachineTool GetXyzabcMachineTool() => MachineTool;
+        /// <summary>
+        /// Gets the machine tool as a machining chain.
+        /// </summary>
+        /// <returns>Machining chain.</returns>
         public IMachiningChain GetMachiningChain() => MachineTool;
     }
 }

MachineTool/DemoBuildMachineToolWithoutGeometrys.cs

@@ -18,12 +18,12 @@ public static class DemoBuildMachineToolWithoutGeometrys
 	/// Generates an empty machine tool with basic configuration.
 	/// </summary>
 	/// <returns>A configured but empty machine tool without solids.</returns>
-	public static CodeXyzabcMachineTool GenEmptyMachineTool()
+	public static GeneralXyzabcMachineTool GenEmptyMachineTool()
 	{
 		CodeXyzabcChain chain = new CodeXyzabcChain("[O][C][w];[O][X][Y][Z][B][S][t]");
 		if (chain.ToolBuckleTransformer is StaticTranslation st)
 			st.Trans = new Vec3d(-200, 200, 400);
-		CodeXyzabcMachineTool xyzabcMachineTool = new CodeXyzabcMachineTool(chain);
+		GeneralXyzabcMachineTool xyzabcMachineTool = new GeneralXyzabcMachineTool(chain);
 		return xyzabcMachineTool;
 	}
 }

Machining/DemoBuildGeomOnlyMachiningProject.cs

@@ -86,9 +86,9 @@ public static class DemoBuildGeomOnlyMachiningProject
 
 		IProgress<object> progress = null;
 		localProjectService.MachiningChain
-				= XFactory.GenByFile<CodeXyzabcMachineTool>(
-					"Resource", "MachineTool/PMC-B1/PMC-B1.mt", progress);
-		localProjectService.MachiningChainFile = "PMC-B1/PMC-B1.mt";
+				= XFactory.GenByFile<GeneralXyzabcMachineTool>(
+					"Resource", "MachineTool/Table-B1.default/Table-B1.mt", progress);
+		localProjectService.MachiningChainFile = "Table-B1.default/Table-B1.mt";
 
 		localProjectService.SaveProject();
 

Machining/DemoBuildMachiningProject.cs

@@ -64,11 +64,11 @@ public static class DemoBuildMachiningProject
 			InnerBeamProfile = new FluteDependentRatioProfile(),
 			MillingCutterOptLimit = new MillingCutterOptOption(),
 		};
-		//build FluteContourTray property 
+		//build Fluting property
 		double helixAngle_deg = 50;
 		double radialRakeAngle_deg = 15;
 		double bottomOuterRadius_mm = diameter_mm / 2 - roundRadius_mm;
-		millingCutter.FluteContourTray = new UniformContourTray()
+		millingCutter.Fluting = new UniformFluting()
 		{
 			TrackNum = 3,
 			BaselineOneContour = new FluteContour()
@@ -111,10 +111,10 @@ public static class DemoBuildMachiningProject
 			MillingCutterOptLimit = new MillingCutterOptOption()
 		};
 
-		//build FluteContourTray property 
+		//build Fluting property
 		double helixAngle_deg = 50;
 		double radialRakeAngle_deg = 15;
-		millingCutter.FluteContourTray = new UniformContourTray()
+		millingCutter.Fluting = new UniformFluting()
 		{
 			TrackNum = 3,
 			BaselineOneContour = new FluteContour()
@@ -198,16 +198,16 @@ public static class DemoBuildMachiningProject
 			IdealGeom = null,
 			WorkpieceGeomToFixtureBuckleTransformer = new StaticTranslation(new Vec3d(0, 0, 0)),
 			CuttingPara = XFactory.GenByFile<ICuttingPara>(
-				"Resource/CuttingParameter", "Al6061T6.mp", progress),
+				"Resource/CuttingParameter", "Al6061T6.default.mp", progress),
 			WorkpieceMaterial = XFactory.GenByFile<WorkpieceMaterial>(
-				"Resource/WorkpieceMaterial", "Al6061T6.WorkpieceMaterial", progress),
+				"Resource/WorkpieceMaterial", "Al6061T6.default.WorkpieceMaterial", progress),
 		};
 		#endregion
 
 		#region ConfigureMachineChain
 		localProjectService.MachiningChain
-			= XFactory.GenByFile<CodeXyzabcMachineTool>(
-				"Resource", "MachineTool/PMC-B1/PMC-B1.mt", progress);
+			= XFactory.GenByFile<GeneralXyzabcMachineTool>(
+				"Resource", "MachineTool/Table-B1.default/Table-B1.mt", progress);
 		#endregion
 
 		machiningProject.MakeXmlSourceToFile(projectPath);