deploy.
This commit is contained in:
@@ -11,17 +11,17 @@ references:
|
||||
name: Background / Coolant
|
||||
href: anatomy/general-setup/background-coolant.html
|
||||
- uid: Anatomy-Box3dControl
|
||||
name: Box3d Control
|
||||
href: anatomy/geom/box3d-control.html
|
||||
name: Box3d Editor
|
||||
href: anatomy/geom/box3d-editor.html
|
||||
- uid: Anatomy-BySource
|
||||
name: Anatomy by Source Directory
|
||||
href: anatomy/by-source/index.html
|
||||
- uid: Anatomy-BySource-WebserviceBackend
|
||||
name: Web Service Backend Source Tree
|
||||
href: anatomy/by-source/webservice-backend/index.html
|
||||
href: anatomy/by-source/webservice-backend.html
|
||||
- uid: Anatomy-BySource-WebserviceSpa
|
||||
name: Web Service SPA Source Tree
|
||||
href: anatomy/by-source/webservice-spa/index.html
|
||||
href: anatomy/by-source/webservice-spa.html
|
||||
- uid: Anatomy-ControlTree
|
||||
name: Control Tree
|
||||
href: anatomy/platform/control-tree.html
|
||||
@@ -92,8 +92,8 @@ references:
|
||||
name: Cycle-Line Charts
|
||||
href: anatomy/execution/cycle-line-charts.html
|
||||
- uid: Anatomy-CylindroidControl
|
||||
name: Cylindroid Control
|
||||
href: anatomy/geom/cylindroid-control.html
|
||||
name: Cylindroid Editor
|
||||
href: anatomy/geom/cylindroid-editor.html
|
||||
- uid: Anatomy-CylindroidHolderPanel
|
||||
name: Cylindroid Holder Panel
|
||||
href: anatomy/tool-house/holder/cylindroid-holder-panel.html
|
||||
@@ -110,8 +110,8 @@ references:
|
||||
name: Execution Tool Bar
|
||||
href: anatomy/execution/execution-tool-bar.html
|
||||
- uid: Anatomy-ExtendedCylinderPanel
|
||||
name: Extended Cylinder Panel
|
||||
href: anatomy/geom/extended-cylinder-panel.html
|
||||
name: ExtendedCylinder Editor
|
||||
href: anatomy/geom/extended-cylinder-editor.html
|
||||
- uid: Anatomy-Fixture
|
||||
name: Fixture
|
||||
href: anatomy/general-setup/fixture.html
|
||||
@@ -131,11 +131,11 @@ references:
|
||||
name: Geometry Panels
|
||||
href: anatomy/geom/index.html
|
||||
- uid: Anatomy-GeomCombinationControl
|
||||
name: Geometry Combination Control
|
||||
href: anatomy/geom/geom-combination-control.html
|
||||
name: GeomCombination Editor
|
||||
href: anatomy/geom/geom-combination-editor.html
|
||||
- uid: Anatomy-GeomManageControl
|
||||
name: Geometry Management Panel
|
||||
href: anatomy/geom/geom-manage-control.html
|
||||
name: Geometry Editor
|
||||
href: anatomy/geom/geometry-editor.html
|
||||
- uid: Anatomy-GraphicCacheMenu
|
||||
name: Graphic-Cache SubMenu
|
||||
href: anatomy/execution/graphic-cache-menu.html
|
||||
@@ -157,6 +157,9 @@ references:
|
||||
- uid: Anatomy-LanguageSelectionSubmenu
|
||||
name: Language Selection SubMenu
|
||||
href: anatomy/shell/language-selection-submenu.html
|
||||
- uid: Anatomy-LegacyControllerSettings
|
||||
name: Legacy Controller Settings
|
||||
href: anatomy/legacy-controller-settings.html
|
||||
- uid: Anatomy-ListCommandPanel
|
||||
name: List Command Panel
|
||||
href: anatomy/execution/mission/ListCommand-panel.html
|
||||
@@ -179,8 +182,8 @@ references:
|
||||
name: Mechanism Builder Page
|
||||
href: anatomy/util/mech-builder.html
|
||||
- uid: Anatomy-MeshedGeomPanel
|
||||
name: Meshed Geometry Panel
|
||||
href: anatomy/geom/meshed-geom-panel.html
|
||||
name: MeshedGeomFile Editor
|
||||
href: anatomy/geom/meshed-geom-file-editor.html
|
||||
- uid: Anatomy-MessageSection
|
||||
name: Bottom Message Bar
|
||||
href: anatomy/shell/bottom-message-bar.html
|
||||
@@ -263,8 +266,8 @@ references:
|
||||
name: Stick Tool Panel
|
||||
href: anatomy/tool-house/stick-tool-panel.html
|
||||
- uid: Anatomy-StlFileControl
|
||||
name: STL File Control
|
||||
href: anatomy/geom/stlfile-control.html
|
||||
name: StlFile Editor
|
||||
href: anatomy/geom/stlfile-editor.html
|
||||
- uid: Anatomy-StlPreviewPane
|
||||
name: STL Preview Pane
|
||||
href: anatomy/util/stl-preview-pane.html
|
||||
@@ -275,8 +278,8 @@ references:
|
||||
name: Tool House Page
|
||||
href: anatomy/tool-house/index.html
|
||||
- uid: Anatomy-TransformationGeomControl
|
||||
name: Transformation Geometry Control
|
||||
href: anatomy/geom/transformation-geom-control.html
|
||||
name: TransformationGeom Editor
|
||||
href: anatomy/geom/transformation-geom-editor.html
|
||||
- uid: Anatomy-Transformers
|
||||
name: Transformer Select Panel
|
||||
href: anatomy/geom/transformer-panel.html
|
||||
@@ -73288,6 +73291,19 @@ references:
|
||||
isSpec: "True"
|
||||
fullName: Hi.MachiningProcs.MachiningActRunnerConfig.MakeXmlSource
|
||||
nameWithType: MachiningActRunnerConfig.MakeXmlSource
|
||||
- uid: Hi.MachiningProcs.MachiningActRunnerConfig.RadiusOffsetBasis
|
||||
name: RadiusOffsetBasis
|
||||
href: api/Hi.MachiningProcs.MachiningActRunnerConfig.html#Hi_MachiningProcs_MachiningActRunnerConfig_RadiusOffsetBasis
|
||||
commentId: P:Hi.MachiningProcs.MachiningActRunnerConfig.RadiusOffsetBasis
|
||||
fullName: Hi.MachiningProcs.MachiningActRunnerConfig.RadiusOffsetBasis
|
||||
nameWithType: MachiningActRunnerConfig.RadiusOffsetBasis
|
||||
- uid: Hi.MachiningProcs.MachiningActRunnerConfig.RadiusOffsetBasis*
|
||||
name: RadiusOffsetBasis
|
||||
href: api/Hi.MachiningProcs.MachiningActRunnerConfig.html#Hi_MachiningProcs_MachiningActRunnerConfig_RadiusOffsetBasis_
|
||||
commentId: Overload:Hi.MachiningProcs.MachiningActRunnerConfig.RadiusOffsetBasis
|
||||
isSpec: "True"
|
||||
fullName: Hi.MachiningProcs.MachiningActRunnerConfig.RadiusOffsetBasis
|
||||
nameWithType: MachiningActRunnerConfig.RadiusOffsetBasis
|
||||
- uid: Hi.MachiningProcs.MachiningActRunnerConfig.Reg(Hi.Common.XmlUtils.XFactory)
|
||||
name: Reg(XFactory)
|
||||
href: api/Hi.MachiningProcs.MachiningActRunnerConfig.html#Hi_MachiningProcs_MachiningActRunnerConfig_Reg_Hi_Common_XmlUtils_XFactory_
|
||||
@@ -114446,6 +114462,24 @@ references:
|
||||
isSpec: "True"
|
||||
fullName: Hi.NcParsers.Dependencys.Generic.MachineAxisConfig.XName
|
||||
nameWithType: MachineAxisConfig.XName
|
||||
- uid: Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis
|
||||
name: RadiusOffsetBasis
|
||||
href: api/Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis.html
|
||||
commentId: T:Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis
|
||||
fullName: Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis
|
||||
nameWithType: RadiusOffsetBasis
|
||||
- uid: Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis.CutterRadius
|
||||
name: CutterRadius
|
||||
href: api/Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis.html#Hi_NcParsers_Dependencys_Generic_RadiusOffsetBasis_CutterRadius
|
||||
commentId: F:Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis.CutterRadius
|
||||
fullName: Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis.CutterRadius
|
||||
nameWithType: RadiusOffsetBasis.CutterRadius
|
||||
- uid: Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis.ZeroBased
|
||||
name: ZeroBased
|
||||
href: api/Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis.html#Hi_NcParsers_Dependencys_Generic_RadiusOffsetBasis_ZeroBased
|
||||
commentId: F:Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis.ZeroBased
|
||||
fullName: Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis.ZeroBased
|
||||
nameWithType: RadiusOffsetBasis.ZeroBased
|
||||
- uid: Hi.NcParsers.Dependencys.Generic.SubProgramFolderConfig
|
||||
name: SubProgramFolderConfig
|
||||
href: api/Hi.NcParsers.Dependencys.Generic.SubProgramFolderConfig.html
|
||||
@@ -114816,12 +114850,12 @@ references:
|
||||
isSpec: "True"
|
||||
fullName: Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.TryGetToolRadiusOffset_mm
|
||||
nameWithType: ToolOffsetTable.TryGetToolRadiusOffset_mm
|
||||
- uid: Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.UpdateIdealByToolHouse(Hi.Machining.MachiningToolHouse)
|
||||
name: UpdateIdealByToolHouse(MachiningToolHouse)
|
||||
href: api/Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.html#Hi_NcParsers_Dependencys_Generic_ToolOffsetTable_UpdateIdealByToolHouse_Hi_Machining_MachiningToolHouse_
|
||||
commentId: M:Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.UpdateIdealByToolHouse(Hi.Machining.MachiningToolHouse)
|
||||
fullName: Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.UpdateIdealByToolHouse(Hi.Machining.MachiningToolHouse)
|
||||
nameWithType: ToolOffsetTable.UpdateIdealByToolHouse(MachiningToolHouse)
|
||||
- uid: Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.UpdateIdealByToolHouse(Hi.Machining.MachiningToolHouse,Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis)
|
||||
name: UpdateIdealByToolHouse(MachiningToolHouse, RadiusOffsetBasis)
|
||||
href: api/Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.html#Hi_NcParsers_Dependencys_Generic_ToolOffsetTable_UpdateIdealByToolHouse_Hi_Machining_MachiningToolHouse_Hi_NcParsers_Dependencys_Generic_RadiusOffsetBasis_
|
||||
commentId: M:Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.UpdateIdealByToolHouse(Hi.Machining.MachiningToolHouse,Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis)
|
||||
fullName: Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.UpdateIdealByToolHouse(Hi.Machining.MachiningToolHouse, Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis)
|
||||
nameWithType: ToolOffsetTable.UpdateIdealByToolHouse(MachiningToolHouse, RadiusOffsetBasis)
|
||||
- uid: Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.UpdateIdealByToolHouse*
|
||||
name: UpdateIdealByToolHouse
|
||||
href: api/Hi.NcParsers.Dependencys.Generic.ToolOffsetTable.html#Hi_NcParsers_Dependencys_Generic_ToolOffsetTable_UpdateIdealByToolHouse_
|
||||
@@ -148999,6 +149033,56 @@ references:
|
||||
isSpec: "True"
|
||||
fullName: Hi.NcParsers.PostLogicSyntaxs.RadiusCompensationSyntax.XName
|
||||
nameWithType: RadiusCompensationSyntax.XName
|
||||
- uid: Hi.NcParsers.RadiusCompInterference
|
||||
name: RadiusCompInterference
|
||||
href: api/Hi.NcParsers.RadiusCompInterference.html
|
||||
commentId: T:Hi.NcParsers.RadiusCompInterference
|
||||
fullName: Hi.NcParsers.RadiusCompInterference
|
||||
nameWithType: RadiusCompInterference
|
||||
- uid: Hi.NcParsers.RadiusCompInterference.ArcTolerance_mm
|
||||
name: ArcTolerance_mm
|
||||
href: api/Hi.NcParsers.RadiusCompInterference.html#Hi_NcParsers_RadiusCompInterference_ArcTolerance_mm
|
||||
commentId: F:Hi.NcParsers.RadiusCompInterference.ArcTolerance_mm
|
||||
fullName: Hi.NcParsers.RadiusCompInterference.ArcTolerance_mm
|
||||
nameWithType: RadiusCompInterference.ArcTolerance_mm
|
||||
- uid: Hi.NcParsers.RadiusCompInterference.DiagnosticId
|
||||
name: DiagnosticId
|
||||
href: api/Hi.NcParsers.RadiusCompInterference.html#Hi_NcParsers_RadiusCompInterference_DiagnosticId
|
||||
commentId: F:Hi.NcParsers.RadiusCompInterference.DiagnosticId
|
||||
fullName: Hi.NcParsers.RadiusCompInterference.DiagnosticId
|
||||
nameWithType: RadiusCompInterference.DiagnosticId
|
||||
- uid: Hi.NcParsers.RadiusCompInterference.TryDescribeArc(Hi.Geom.Vec3d,Hi.Geom.Vec3d,Hi.Geom.Vec3d,System.Int32,System.Double,System.Int32,System.String@,System.Collections.Generic.Dictionary{System.String,System.Object}@)
|
||||
name: TryDescribeArc(Vec3d, Vec3d, Vec3d, int, double, int, out string, out Dictionary<string, object>)
|
||||
href: api/Hi.NcParsers.RadiusCompInterference.html#Hi_NcParsers_RadiusCompInterference_TryDescribeArc_Hi_Geom_Vec3d_Hi_Geom_Vec3d_Hi_Geom_Vec3d_System_Int32_System_Double_System_Int32_System_String__System_Collections_Generic_Dictionary_System_String_System_Object___
|
||||
commentId: M:Hi.NcParsers.RadiusCompInterference.TryDescribeArc(Hi.Geom.Vec3d,Hi.Geom.Vec3d,Hi.Geom.Vec3d,System.Int32,System.Double,System.Int32,System.String@,System.Collections.Generic.Dictionary{System.String,System.Object}@)
|
||||
name.vb: TryDescribeArc(Vec3d, Vec3d, Vec3d, Integer, Double, Integer, String, Dictionary(Of String, Object))
|
||||
fullName: Hi.NcParsers.RadiusCompInterference.TryDescribeArc(Hi.Geom.Vec3d, Hi.Geom.Vec3d, Hi.Geom.Vec3d, int, double, int, out string, out System.Collections.Generic.Dictionary<string, object>)
|
||||
fullName.vb: Hi.NcParsers.RadiusCompInterference.TryDescribeArc(Hi.Geom.Vec3d, Hi.Geom.Vec3d, Hi.Geom.Vec3d, Integer, Double, Integer, String, System.Collections.Generic.Dictionary(Of String, Object))
|
||||
nameWithType: RadiusCompInterference.TryDescribeArc(Vec3d, Vec3d, Vec3d, int, double, int, out string, out Dictionary<string, object>)
|
||||
nameWithType.vb: RadiusCompInterference.TryDescribeArc(Vec3d, Vec3d, Vec3d, Integer, Double, Integer, String, Dictionary(Of String, Object))
|
||||
- uid: Hi.NcParsers.RadiusCompInterference.TryDescribeArc*
|
||||
name: TryDescribeArc
|
||||
href: api/Hi.NcParsers.RadiusCompInterference.html#Hi_NcParsers_RadiusCompInterference_TryDescribeArc_
|
||||
commentId: Overload:Hi.NcParsers.RadiusCompInterference.TryDescribeArc
|
||||
isSpec: "True"
|
||||
fullName: Hi.NcParsers.RadiusCompInterference.TryDescribeArc
|
||||
nameWithType: RadiusCompInterference.TryDescribeArc
|
||||
- uid: Hi.NcParsers.RadiusCompInterference.TryDescribeLinear(Hi.Geom.Vec3d,Hi.Geom.Vec3d,System.Int32,System.Double,System.Int32,System.String@,System.Collections.Generic.Dictionary{System.String,System.Object}@)
|
||||
name: TryDescribeLinear(Vec3d, Vec3d, int, double, int, out string, out Dictionary<string, object>)
|
||||
href: api/Hi.NcParsers.RadiusCompInterference.html#Hi_NcParsers_RadiusCompInterference_TryDescribeLinear_Hi_Geom_Vec3d_Hi_Geom_Vec3d_System_Int32_System_Double_System_Int32_System_String__System_Collections_Generic_Dictionary_System_String_System_Object___
|
||||
commentId: M:Hi.NcParsers.RadiusCompInterference.TryDescribeLinear(Hi.Geom.Vec3d,Hi.Geom.Vec3d,System.Int32,System.Double,System.Int32,System.String@,System.Collections.Generic.Dictionary{System.String,System.Object}@)
|
||||
name.vb: TryDescribeLinear(Vec3d, Vec3d, Integer, Double, Integer, String, Dictionary(Of String, Object))
|
||||
fullName: Hi.NcParsers.RadiusCompInterference.TryDescribeLinear(Hi.Geom.Vec3d, Hi.Geom.Vec3d, int, double, int, out string, out System.Collections.Generic.Dictionary<string, object>)
|
||||
fullName.vb: Hi.NcParsers.RadiusCompInterference.TryDescribeLinear(Hi.Geom.Vec3d, Hi.Geom.Vec3d, Integer, Double, Integer, String, System.Collections.Generic.Dictionary(Of String, Object))
|
||||
nameWithType: RadiusCompInterference.TryDescribeLinear(Vec3d, Vec3d, int, double, int, out string, out Dictionary<string, object>)
|
||||
nameWithType.vb: RadiusCompInterference.TryDescribeLinear(Vec3d, Vec3d, Integer, Double, Integer, String, Dictionary(Of String, Object))
|
||||
- uid: Hi.NcParsers.RadiusCompInterference.TryDescribeLinear*
|
||||
name: TryDescribeLinear
|
||||
href: api/Hi.NcParsers.RadiusCompInterference.html#Hi_NcParsers_RadiusCompInterference_TryDescribeLinear_
|
||||
commentId: Overload:Hi.NcParsers.RadiusCompInterference.TryDescribeLinear
|
||||
isSpec: "True"
|
||||
fullName: Hi.NcParsers.RadiusCompInterference.TryDescribeLinear
|
||||
nameWithType: RadiusCompInterference.TryDescribeLinear
|
||||
- uid: Hi.NcParsers.Segmenters
|
||||
name: Hi.NcParsers.Segmenters
|
||||
href: api/Hi.NcParsers.Segmenters.html
|
||||
@@ -161596,12 +161680,12 @@ references:
|
||||
isSpec: "True"
|
||||
fullName: Hi.Numerical.MillingToolOffsetTable.Reg
|
||||
nameWithType: MillingToolOffsetTable.Reg
|
||||
- uid: Hi.Numerical.MillingToolOffsetTable.UpdateIdealMillingToolOffsetTableByToolHouse(Hi.Machining.MachiningToolHouse)
|
||||
name: UpdateIdealMillingToolOffsetTableByToolHouse(MachiningToolHouse)
|
||||
href: api/Hi.Numerical.MillingToolOffsetTable.html#Hi_Numerical_MillingToolOffsetTable_UpdateIdealMillingToolOffsetTableByToolHouse_Hi_Machining_MachiningToolHouse_
|
||||
commentId: M:Hi.Numerical.MillingToolOffsetTable.UpdateIdealMillingToolOffsetTableByToolHouse(Hi.Machining.MachiningToolHouse)
|
||||
fullName: Hi.Numerical.MillingToolOffsetTable.UpdateIdealMillingToolOffsetTableByToolHouse(Hi.Machining.MachiningToolHouse)
|
||||
nameWithType: MillingToolOffsetTable.UpdateIdealMillingToolOffsetTableByToolHouse(MachiningToolHouse)
|
||||
- uid: Hi.Numerical.MillingToolOffsetTable.UpdateIdealMillingToolOffsetTableByToolHouse(Hi.Machining.MachiningToolHouse,Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis)
|
||||
name: UpdateIdealMillingToolOffsetTableByToolHouse(MachiningToolHouse, RadiusOffsetBasis)
|
||||
href: api/Hi.Numerical.MillingToolOffsetTable.html#Hi_Numerical_MillingToolOffsetTable_UpdateIdealMillingToolOffsetTableByToolHouse_Hi_Machining_MachiningToolHouse_Hi_NcParsers_Dependencys_Generic_RadiusOffsetBasis_
|
||||
commentId: M:Hi.Numerical.MillingToolOffsetTable.UpdateIdealMillingToolOffsetTableByToolHouse(Hi.Machining.MachiningToolHouse,Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis)
|
||||
fullName: Hi.Numerical.MillingToolOffsetTable.UpdateIdealMillingToolOffsetTableByToolHouse(Hi.Machining.MachiningToolHouse, Hi.NcParsers.Dependencys.Generic.RadiusOffsetBasis)
|
||||
nameWithType: MillingToolOffsetTable.UpdateIdealMillingToolOffsetTableByToolHouse(MachiningToolHouse, RadiusOffsetBasis)
|
||||
- uid: Hi.Numerical.MillingToolOffsetTable.UpdateIdealMillingToolOffsetTableByToolHouse*
|
||||
name: UpdateIdealMillingToolOffsetTableByToolHouse
|
||||
href: api/Hi.Numerical.MillingToolOffsetTable.html#Hi_Numerical_MillingToolOffsetTable_UpdateIdealMillingToolOffsetTableByToolHouse_
|
||||
|
||||
Reference in New Issue
Block a user