HiNC-Deploy/DemoStandardPath
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
master
DemoStandardPath/test.hincproj
T
iamboss 4428b9a2d5 feat(DemoStandardPath): migrate the demo to the MachiningProject schema and add the circle-test path 
Main.hincproj moves off the legacy <MillingCourse> root onto <MachiningProject>,
so its six 範例 script entries are now EnablingWrapper-based and it carries an
explicit MillingTool (helix 50 deg, 28 mm exposed). The materials follow the same
rename: HeatTransferCoefficient_WdmK -> HeatConductivity_WdmK, and Al6061T6.mp
becomes RakeFaceCuttingPara3d with an AnchorRakeAngle_deg field.

Because of that root-element change the ApiVersion string reads lower (3.1.200.0)
than the legacy copy it replaces (3.1.236.0) -- the two counters are not
comparable across the rename.

Adds NC/circle-test.ptp with its posted Output/circle.ptp.nc, plus test.hincproj;
ignores the *.step.csv exports and filtered-msg.txt.
2026-08-26 19:12:40 +08:00

1931 lines
76 KiB
XML
Raw Permalink Blame History

<?xml version="1.0" encoding="utf-8"?>
<MachiningProject ApiVersion="3.1.191.0">
<MachiningEquipment>
<MachiningEquipment>
<MachiningChain>
<XmlSource>PmcB1s/PMC_B1.mt</XmlSource>
</MachiningChain>
<SpindleCapability>
<SpindleCapability>
<Name>NoName</Name>
<Note></Note>
<EnergyEfficiency>0.4</EnergyEfficiency>
<GearShiftSpindleSpeed_rpm />
<DryRunFrictionPowerCoefficient_mWdrpm>4.82</DryRunFrictionPowerCoefficient_mWdrpm>
<DryRunWindagePowerCoefficient_pWdrpm3>90</DryRunWindagePowerCoefficient_pWdrpm3>
<WorkableDurationToSpindleSpeedPowerContoursDictionary>
<Contour WorkableDuration-min="15">
<SpindleSpeedToPower>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Power-kW>0</Power-kW>
</SpindleSpeedToPower>
<SpindleSpeedToPower>
<SpindleSpeed-RPM>1500</SpindleSpeed-RPM>
<Power-kW>7.5</Power-kW>
</SpindleSpeedToPower>
<SpindleSpeedToPower>
<SpindleSpeed-RPM>4500</SpindleSpeed-RPM>
<Power-kW>7.5</Power-kW>
</SpindleSpeedToPower>
<SpindleSpeedToPower>
<SpindleSpeed-RPM>8000.000000000001</SpindleSpeed-RPM>
<Power-kW>4</Power-kW>
</SpindleSpeedToPower>
</Contour>
<Contour WorkableDuration-min="60">
<SpindleSpeedToPower>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Power-kW>0</Power-kW>
</SpindleSpeedToPower>
<SpindleSpeedToPower>
<SpindleSpeed-RPM>1500</SpindleSpeed-RPM>
<Power-kW>5.5</Power-kW>
</SpindleSpeedToPower>
<SpindleSpeedToPower>
<SpindleSpeed-RPM>4500</SpindleSpeed-RPM>
<Power-kW>5.5</Power-kW>
</SpindleSpeedToPower>
<SpindleSpeedToPower>
<SpindleSpeed-RPM>8000.000000000001</SpindleSpeed-RPM>
<Power-kW>3</Power-kW>
</SpindleSpeedToPower>
</Contour>
<Contour WorkableDuration-min="INF">
<SpindleSpeedToPower>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Power-kW>0</Power-kW>
</SpindleSpeedToPower>
<SpindleSpeedToPower>
<SpindleSpeed-RPM>1500</SpindleSpeed-RPM>
<Power-kW>5.5</Power-kW>
</SpindleSpeedToPower>
<SpindleSpeedToPower>
<SpindleSpeed-RPM>4500</SpindleSpeed-RPM>
<Power-kW>5.5</Power-kW>
</SpindleSpeedToPower>
<SpindleSpeedToPower>
<SpindleSpeed-RPM>8000.000000000001</SpindleSpeed-RPM>
<Power-kW>3</Power-kW>
</SpindleSpeedToPower>
</Contour>
</WorkableDurationToSpindleSpeedPowerContoursDictionary>
<WorkableDurationToSpindleSpeedTorqueContoursDictionary>
<Contour WorkableDuration-min="15">
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Torque-Nm>50</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>1500</SpindleSpeed-RPM>
<Torque-Nm>50</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>2000.0000000000002</SpindleSpeed-RPM>
<Torque-Nm>37</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>2600</SpindleSpeed-RPM>
<Torque-Nm>30</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>4000.0000000000005</SpindleSpeed-RPM>
<Torque-Nm>19</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>6000</SpindleSpeed-RPM>
<Torque-Nm>12</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>8000.000000000001</SpindleSpeed-RPM>
<Torque-Nm>8</Torque-Nm>
</SpindleSpeedToTorque>
</Contour>
<Contour WorkableDuration-min="60">
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Torque-Nm>35</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>1500</SpindleSpeed-RPM>
<Torque-Nm>35</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>2000.0000000000002</SpindleSpeed-RPM>
<Torque-Nm>29</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>2200</SpindleSpeed-RPM>
<Torque-Nm>27</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>2900</SpindleSpeed-RPM>
<Torque-Nm>20</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>4000.0000000000005</SpindleSpeed-RPM>
<Torque-Nm>15</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>6000</SpindleSpeed-RPM>
<Torque-Nm>8</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>8000.000000000001</SpindleSpeed-RPM>
<Torque-Nm>5</Torque-Nm>
</SpindleSpeedToTorque>
</Contour>
<Contour WorkableDuration-min="INF">
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Torque-Nm>50</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>1500</SpindleSpeed-RPM>
<Torque-Nm>50</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>2000.0000000000002</SpindleSpeed-RPM>
<Torque-Nm>30</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>3000</SpindleSpeed-RPM>
<Torque-Nm>20</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>4000.0000000000005</SpindleSpeed-RPM>
<Torque-Nm>15</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>6000</SpindleSpeed-RPM>
<Torque-Nm>8</Torque-Nm>
</SpindleSpeedToTorque>
<SpindleSpeedToTorque>
<SpindleSpeed-RPM>8000.000000000001</SpindleSpeed-RPM>
<Torque-Nm>5</Torque-Nm>
</SpindleSpeedToTorque>
</Contour>
</WorkableDurationToSpindleSpeedTorqueContoursDictionary>
</SpindleCapability>
</SpindleCapability>
<Fixture>
<Fixture>
<Solid>
<TransformationGeom>
<Transformer>
<NoTransform />
</Transformer>
<Geom>
<Box3d>
<Min>(-40, -40, 0)</Min>
<Max>(40, 40, 10)</Max>
</Box3d>
</Geom>
</TransformationGeom>
</Solid>
<GeomToTableTransformer>
<NoTransform />
</GeomToTableTransformer>
<GeomToWorkpieceTransformer>
<StaticTranslation Trans="(0, 0, 10)" />
</GeomToWorkpieceTransformer>
</Fixture>
</Fixture>
<Workpiece>
<Workpiece>
<InitResolution>0.125</InitResolution>
<InitGeom>
<TransformationGeom>
<Transformer>
<StaticTranslation Trans="(0, 0, 0)" />
</Transformer>
<Geom>
<Box3d>
<Min>(2, 0, -50)</Min>
<Max>(72, 50, 0)</Max>
</Box3d>
</Geom>
</TransformationGeom>
</InitGeom>
<WorkpieceGeomToProgramZeroTransformer>
<StaticTranslation Trans="(0, 0, 0)" />
</WorkpieceGeomToProgramZeroTransformer>
<WorkpieceGeomToFixtureBuckleTransformer>
<StaticTranslation Trans="(35, 25, -50)" />
</WorkpieceGeomToFixtureBuckleTransformer>
<IdealGeom>
<TransformationGeom>
<Transformer>
<StaticTranslation Trans="(2, 0, -50)" />
</Transformer>
<Geom>
<StlFile>Design/standard_force_4exp_201902_design.stl</StlFile>
</Geom>
</TransformationGeom>
</IdealGeom>
<CuttingPara>
<XmlSource>Al6061T6.mp</XmlSource>
</CuttingPara>
<WorkpieceMaterial>
<XmlSource>Al6061T6.WorkpieceMaterial</XmlSource>
</WorkpieceMaterial>
</Workpiece>
</Workpiece>
<TableToComp>
<NoTransform />
</TableToComp>
<BackgroundTemperature_C>25</BackgroundTemperature_C>
<CoolantHeatCondition>
<Name />
<Note />
<CoolantTemperature_C>25</CoolantTemperature_C>
<CoolantConvectionCoefficient_Wdm2K>1000</CoolantConvectionCoefficient_Wdm2K>
<MistFloodConvectionRatio>0.5</MistFloodConvectionRatio>
<OffConvectionCoefficient_Wdm2K>50</OffConvectionCoefficient_Wdm2K>
</CoolantHeatCondition>
</MachiningEquipment>
</MachiningEquipment>
<MachiningToolHouse>
<MachiningToolHouse>
<Entry ID="1">
<MillingTool>
<Note>T1</Note>
<Holder>
<CylindroidHolder>
<Name></Name>
<Note></Note>
<Cylindroid>
<PairZr>(0,10)</PairZr>
<PairZr>(30,10)</PairZr>
</Cylindroid>
<PolarResolution2d>
<PolarResolution2d>
<LinearResolution_mm>0.5</LinearResolution_mm>
<AngleResolution_deg>5</AngleResolution_deg>
</PolarResolution2d>
</PolarResolution2d>
</CylindroidHolder>
</Holder>
<Cutter>
<MillingCutter>
<Name></Name>
<Note></Note>
<IntegralMode>SolidEnd</IntegralMode>
<ShaperProfile>
<AptProfile>
<Apt>
<ColumnApt>
<D>12</D>
<Rc>0.5</Rc>
<FluteH>20</FluteH>
</ColumnApt>
</Apt>
</AptProfile>
</ShaperProfile>
<InnerBeamProfile>
<FluteDependentRatioProfile>
<!--<ConstRatioProfile>
<RadiusRatio>0.56</RadiusRatio>
</ConstRatioProfile>-->
</FluteDependentRatioProfile>
</InnerBeamProfile>
<UpperBeamGeom>
<TransformationGeom>
<Transformer />
<Geom>
<Cylindroid>
<PairZr>(20,6)</PairZr>
<PairZr>(75,6)</PairZr>
</Cylindroid>
</Geom>
</TransformationGeom>
</UpperBeamGeom>
<LinearResolution_mm>0.125</LinearResolution_mm>
<AngleResolution_deg>15</AngleResolution_deg>
<FluteContourTray>
<UniformContourTray>
<TrackNum>3</TrackNum>
<BaselineOneContour>
<FluteContour>
<SetupAngle_deg>0</SetupAngle_deg>
<BaseSideContour>
<ConstHelixSideContour>
<Helix_deg>50</Helix_deg>
<RadialRakeAngle_deg>15</RadialRakeAngle_deg>
<RadialReliefAngle_deg>5</RadialReliefAngle_deg>
</ConstHelixSideContour>
</BaseSideContour>
<BaseBottomContour>
<SlideBottomContour>
<AxialRakeAngle_deg>50</AxialRakeAngle_deg>
<DiskAngle_deg>1.5</DiskAngle_deg>
<EccentricAngle_deg>15</EccentricAngle_deg>
<CutterLengthOnBottomProjection_mm>5</CutterLengthOnBottomProjection_mm>
<OuterRadius_mm>5.5</OuterRadius_mm>
</SlideBottomContour>
</BaseBottomContour>
</FluteContour>
</BaselineOneContour>
</UniformContourTray>
</FluteContourTray>
<FluteMaterial>
<XmlSource>WC-Co6-800nm.CutterMaterial</XmlSource>
</FluteMaterial>
<ShankMaterial>
<XmlSource>WC-Co6-800nm.CutterMaterial</XmlSource>
</ShankMaterial>
<CoatingLayerList />
<ShankMass_g MassAssignmentMode="EvaluateByVolume">103.5896112737758</ShankMass_g>
<HoneRadius_um>20</HoneRadius_um>
<ReliefAngle_deg>5</ReliefAngle_deg>
<MillingCutterOptLimit>
<MillingCutterOptOption>
<EnableOpt>true</EnableOpt>
<YieldingSafetyFactor>3</YieldingSafetyFactor>
<EnableLimitByMinimumUncutChipThickness>true</EnableLimitByMinimumUncutChipThickness>
<EnableLimitByReliefAngle>true</EnableLimitByReliefAngle>
<MinFeedPerTooth_mm>0</MinFeedPerTooth_mm>
<MaxFeedPerTooth_mm>999</MaxFeedPerTooth_mm>
</MillingCutterOptOption>
</MillingCutterOptLimit>
</MillingCutter>
</Cutter>
<ExposedCutterHeight_mm>28</ExposedCutterHeight_mm>
<ObservationAnchorReference>HolderAnc</ObservationAnchorReference>
<RelativeHeightFromObservationAnchor_mm>0</RelativeHeightFromObservationAnchor_mm>
<ObservationRingRadius_mm>0</ObservationRingRadius_mm>
</MillingTool>
</Entry>
</MachiningToolHouse>
</MachiningToolHouse>
<NcEnv>
<HardNcEnv>
<CncBrand>Fanuc</CncBrand>
<HomeMc>(0, 0, 0)</HomeMc>
<ToolingMcXyz>(0, 0, 0)</ToolingMcXyz>
<ToolingMcAbc_deg>(0, 0, 0)</ToolingMcAbc_deg>
<MillingToolOffsetTable>
<Entry ID="1">
<MillingToolOffsetTableRow>
<IdealRadius_mm>6</IdealRadius_mm>
<RadialWear_mm>0</RadialWear_mm>
<IdealHeight_mm>58</IdealHeight_mm>
<AxialWear_mm>0</AxialWear_mm>
</MillingToolOffsetTableRow>
</Entry>
</MillingToolOffsetTable>
<EnableShortestRotary>true</EnableShortestRotary>
<EnableArcCornerRadiusCompensation>false</EnableArcCornerRadiusCompensation>
<EnableIntegerShrinkOnPositionCommand>false</EnableIntegerShrinkOnPositionCommand>
<StrokeLimitXyz_mm>
<Box3d>
<Min>(-INF, -INF, -INF)</Min>
<Max>(INF, INF, INF)</Max>
</Box3d>
</StrokeLimitXyz_mm>
<StrokeLimitAbc_deg>
<Box3d>
<Min>(-INF, -INF, -INF)</Min>
<Max>(INF, INF, INF)</Max>
</Box3d>
</StrokeLimitAbc_deg>
<MaxRotarySpeedABC_rpm>(60, 60, 60)</MaxRotarySpeedABC_rpm>
<MaxSpindleSpeed_rpm>60000</MaxSpindleSpeed_rpm>
<RapidFeedrate_mmdmin>20000</RapidFeedrate_mmdmin>
<ToolingTime>PT0S</ToolingTime>
<ConfigurationTable>
<Entry Key="1401#1">0</Entry>
</ConfigurationTable>
<IsoCoordinateTable>
<Entry ID="G54" Offset="(37.400000000000006, -97.4, -116.44)" />
<Entry ID="G55" Offset="(0, 0, 0)" />
<Entry ID="G56" Offset="(0, 0, 0)" />
<Entry ID="G57" Offset="(0, 0, 0)" />
<Entry ID="G58" Offset="(0, 0, 0)" />
<Entry ID="G59" Offset="(0, 0, 0)" />
<Entry ID="G59.1" Offset="(0, 0, 0)" />
<Entry ID="G59.2" Offset="(0, 0, 0)" />
<Entry ID="G59.3" Offset="(0, 0, 0)" />
<Entry ID="G59.4" Offset="(0, 0, 0)" />
<Entry ID="G59.5" Offset="(0, 0, 0)" />
<Entry ID="G59.6" Offset="(0, 0, 0)" />
<Entry ID="G59.7" Offset="(0, 0, 0)" />
<Entry ID="G59.8" Offset="(0, 0, 0)" />
<Entry ID="G59.9" Offset="(0, 0, 0)" />
</IsoCoordinateTable>
</HardNcEnv>
</NcEnv>
<NcRunnerSuit>
<NcRunnerSuit>
<SoftNcRunner>
<SoftNcRunner>
<PipelineNcDependencyList>
<CncBrandDependency>
<Brand>Fanuc</Brand>
</CncBrandDependency>
<FanucParameterTableProxy>
<FanucParameterTable>
<System ParamId="1020" Value="3" />
<System ParamId="3741" Value="60000" />
<System ParamId="4002" Value="5" />
<System ParamId="5003" Value="0" />
<System ParamId="5221" Value="0" />
<System ParamId="5222" Value="0" />
<System ParamId="5223" Value="0" />
<System ParamId="5241" Value="0" />
<System ParamId="5242" Value="0" />
<System ParamId="5243" Value="0" />
<System ParamId="5261" Value="0" />
<System ParamId="5262" Value="0" />
<System ParamId="5263" Value="0" />
<System ParamId="5281" Value="0" />
<System ParamId="5282" Value="0" />
<System ParamId="5283" Value="0" />
<System ParamId="5301" Value="0" />
<System ParamId="5302" Value="0" />
<System ParamId="5303" Value="0" />
<System ParamId="5321" Value="0" />
<System ParamId="5322" Value="0" />
<System ParamId="5323" Value="0" />
<System ParamId="7001" Value="0" />
<System ParamId="7002" Value="0" />
<System ParamId="7003" Value="0" />
<System ParamId="7021" Value="0" />
<System ParamId="7022" Value="0" />
<System ParamId="7023" Value="0" />
<System ParamId="7041" Value="0" />
<System ParamId="7042" Value="0" />
<System ParamId="7043" Value="0" />
<System ParamId="7061" Value="0" />
<System ParamId="7062" Value="0" />
<System ParamId="7063" Value="0" />
<System ParamId="7081" Value="0" />
<System ParamId="7082" Value="0" />
<System ParamId="7083" Value="0" />
<System ParamId="7101" Value="0" />
<System ParamId="7102" Value="0" />
<System ParamId="7103" Value="0" />
<System ParamId="7121" Value="0" />
<System ParamId="7122" Value="0" />
<System ParamId="7123" Value="0" />
<System ParamId="7141" Value="0" />
<System ParamId="7142" Value="0" />
<System ParamId="7143" Value="0" />
<System ParamId="7161" Value="0" />
<System ParamId="7162" Value="0" />
<System ParamId="7163" Value="0" />
<System ParamId="7181" Value="0" />
<System ParamId="7182" Value="0" />
<System ParamId="7183" Value="0" />
<System ParamId="7201" Value="0" />
<System ParamId="7202" Value="0" />
<System ParamId="7203" Value="0" />
<System ParamId="7221" Value="0" />
<System ParamId="7222" Value="0" />
<System ParamId="7223" Value="0" />
<System ParamId="7241" Value="0" />
<System ParamId="7242" Value="0" />
<System ParamId="7243" Value="0" />
<System ParamId="7261" Value="0" />
<System ParamId="7262" Value="0" />
<System ParamId="7263" Value="0" />
<System ParamId="7281" Value="0" />
<System ParamId="7282" Value="0" />
<System ParamId="7283" Value="0" />
<System ParamId="7301" Value="0" />
<System ParamId="7302" Value="0" />
<System ParamId="7303" Value="0" />
<System ParamId="7321" Value="0" />
<System ParamId="7322" Value="0" />
<System ParamId="7323" Value="0" />
<System ParamId="7341" Value="0" />
<System ParamId="7342" Value="0" />
<System ParamId="7343" Value="0" />
<System ParamId="7361" Value="0" />
<System ParamId="7362" Value="0" />
<System ParamId="7363" Value="0" />
<System ParamId="7381" Value="0" />
<System ParamId="7382" Value="0" />
<System ParamId="7383" Value="0" />
<System ParamId="7401" Value="0" />
<System ParamId="7402" Value="0" />
<System ParamId="7403" Value="0" />
<System ParamId="7421" Value="0" />
<System ParamId="7422" Value="0" />
<System ParamId="7423" Value="0" />
<System ParamId="7441" Value="0" />
<System ParamId="7442" Value="0" />
<System ParamId="7443" Value="0" />
<System ParamId="7461" Value="0" />
<System ParamId="7462" Value="0" />
<System ParamId="7463" Value="0" />
<System ParamId="7481" Value="0" />
<System ParamId="7482" Value="0" />
<System ParamId="7483" Value="0" />
<System ParamId="7501" Value="0" />
<System ParamId="7502" Value="0" />
<System ParamId="7503" Value="0" />
<System ParamId="7521" Value="0" />
<System ParamId="7522" Value="0" />
<System ParamId="7523" Value="0" />
<System ParamId="7541" Value="0" />
<System ParamId="7542" Value="0" />
<System ParamId="7543" Value="0" />
<System ParamId="7561" Value="0" />
<System ParamId="7562" Value="0" />
<System ParamId="7563" Value="0" />
<System ParamId="7581" Value="0" />
<System ParamId="7582" Value="0" />
<System ParamId="7583" Value="0" />
<System ParamId="7601" Value="0" />
<System ParamId="7602" Value="0" />
<System ParamId="7603" Value="0" />
<System ParamId="7621" Value="0" />
<System ParamId="7622" Value="0" />
<System ParamId="7623" Value="0" />
<System ParamId="7641" Value="0" />
<System ParamId="7642" Value="0" />
<System ParamId="7643" Value="0" />
<System ParamId="7661" Value="0" />
<System ParamId="7662" Value="0" />
<System ParamId="7663" Value="0" />
<System ParamId="7681" Value="0" />
<System ParamId="7682" Value="0" />
<System ParamId="7683" Value="0" />
<System ParamId="7701" Value="0" />
<System ParamId="7702" Value="0" />
<System ParamId="7703" Value="0" />
<System ParamId="7721" Value="0" />
<System ParamId="7722" Value="0" />
<System ParamId="7723" Value="0" />
<System ParamId="7741" Value="0" />
<System ParamId="7742" Value="0" />
<System ParamId="7743" Value="0" />
<System ParamId="7761" Value="0" />
<System ParamId="7762" Value="0" />
<System ParamId="7763" Value="0" />
<System ParamId="7781" Value="0" />
<System ParamId="7782" Value="0" />
<System ParamId="7783" Value="0" />
<System ParamId="7801" Value="0" />
<System ParamId="7802" Value="0" />
<System ParamId="7803" Value="0" />
<System ParamId="7821" Value="0" />
<System ParamId="7822" Value="0" />
<System ParamId="7823" Value="0" />
<System ParamId="7841" Value="0" />
<System ParamId="7842" Value="0" />
<System ParamId="7843" Value="0" />
<System ParamId="7861" Value="0" />
<System ParamId="7862" Value="0" />
<System ParamId="7863" Value="0" />
<System ParamId="7881" Value="0" />
<System ParamId="7882" Value="0" />
<System ParamId="7883" Value="0" />
<System ParamId="7901" Value="0" />
<System ParamId="7902" Value="0" />
<System ParamId="7903" Value="0" />
<System ParamId="7921" Value="0" />
<System ParamId="7922" Value="0" />
<System ParamId="7923" Value="0" />
<System ParamId="7941" Value="0" />
<System ParamId="7942" Value="0" />
<System ParamId="7943" Value="0" />
<Axis ParamId="1240" AxisName="X" Value="0" />
<Axis ParamId="1240" AxisName="Y" Value="0" />
<Axis ParamId="1240" AxisName="Z" Value="0" />
<Axis ParamId="1420" AxisName="X" Value="48000" />
<Axis ParamId="1420" AxisName="Y" Value="48000" />
<Axis ParamId="1420" AxisName="Z" Value="24000" />
<Axis ParamId="1006" AxisName="X" Value="0" Type="Int" />
<Axis ParamId="1006" AxisName="Y" Value="0" Type="Int" />
<Axis ParamId="1006" AxisName="Z" Value="0" Type="Int" />
</FanucParameterTable>
</FanucParameterTableProxy>
<RetainedCommonVariableTableProxy />
<ToolingMcConfig>
<Axis Name="A" Value="0" />
<Axis Name="B" Value="0" />
<Axis Name="C" Value="0" />
<Axis Name="X" Value="0" />
<Axis Name="Y" Value="0" />
<Axis Name="Z" Value="0" />
</ToolingMcConfig>
<ToolOffsetTableProxy />
<GenericBlockSkipConfig>
<EnabledLayers>1</EnabledLayers>
</GenericBlockSkipConfig>
<SubProgramFolderConfig>
<InternalFolder>NC</InternalFolder>
</SubProgramFolderConfig>
<FanucGotoIterationDependency>
<MaxIterationsPerTarget>1000</MaxIterationsPerTarget>
</FanucGotoIterationDependency>
<FanucWhileDoIterationDependency>
<MaxIterationsPerLoopId>10000</MaxIterationsPerLoopId>
</FanucWhileDoIterationDependency>
<ProjectFolderDependency />
<SegmenterDependency />
<SyntaxPieceLayerDependency />
<FileIndexCounterDependency />
<SentenceIndexCounterDependency />
<NcKinematicsDependency />
</PipelineNcDependencyList>
<Segmenter>
<SingleLineSegmenter />
</Segmenter>
<NcInitializationList>
<HomeMcInitializer />
<StaticInitializer>
<Initialization>{"CoordinateOffset":{"CoordinateId":"G54"},"CannedCycle":{"Term":"G80"}}</Initialization>
</StaticInitializer>
</NcInitializationList>
<NcSyntaxList>
<BundleSyntax>
<Name>Parsing</Name>
<TapeBoundarySyntax />
<FanucProgramNumberSyntax />
<QuoteCommentSyntax />
<HeadIndexSyntax>
<HeadSymbol>N</HeadSymbol>
</HeadIndexSyntax>
<CsScriptSyntax>
<PreMarker>@@</PreMarker>
<PostMarker>@@^</PostMarker>
</CsScriptSyntax>
<BlockSkipSyntax />
<FanucIfThenParsingSyntax />
<FanucWhileDoParsingSyntax />
<TagAssignmentSyntax>
<CategoryPath>
<Item>Assignments</Item>
</CategoryPath>
<TagList />
<VarPrefix>#</VarPrefix>
<TerminateWords />
<RhsDialect>None</RhsDialect>
</TagAssignmentSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G43.4</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes />
<IntParamPrefixes>
<Item>H</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>M</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G05.1</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes />
<IntParamPrefixes>
<Item>Q</Item>
<Item>R</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G4</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes>
<Item>P</Item>
<Item>X</Item>
<Item>S</Item>
</FloatParamPrefixes>
<IntParamPrefixes />
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G28</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes>
<Item>X</Item>
<Item>Y</Item>
<Item>Z</Item>
<Item>A</Item>
<Item>B</Item>
<Item>C</Item>
</FloatParamPrefixes>
<IntParamPrefixes />
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
<Item>F</Item>
<Item>S</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G41</Item>
<Item>G42</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes />
<IntParamPrefixes>
<Item>D</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>M</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G43</Item>
<Item>G44</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes />
<IntParamPrefixes>
<Item>H</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>M</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G52</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes>
<Item>X</Item>
<Item>Y</Item>
<Item>Z</Item>
</FloatParamPrefixes>
<IntParamPrefixes />
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
<Item>F</Item>
<Item>S</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G68</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes>
<Item>X</Item>
<Item>Y</Item>
<Item>Z</Item>
<Item>I</Item>
<Item>J</Item>
<Item>K</Item>
<Item>R</Item>
</FloatParamPrefixes>
<IntParamPrefixes />
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
<Item>F</Item>
<Item>S</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G68.2</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes>
<Item>X</Item>
<Item>Y</Item>
<Item>Z</Item>
<Item>I</Item>
<Item>J</Item>
<Item>K</Item>
</FloatParamPrefixes>
<IntParamPrefixes />
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
<Item>F</Item>
<Item>S</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G73</Item>
<Item>G74</Item>
<Item>G76</Item>
<Item>G81</Item>
<Item>G82</Item>
<Item>G83</Item>
<Item>G84</Item>
<Item>G85</Item>
<Item>G86</Item>
<Item>G87</Item>
<Item>G89</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes>
<Item>X</Item>
<Item>Y</Item>
<Item>Z</Item>
<Item>R</Item>
<Item>Q</Item>
<Item>F</Item>
</FloatParamPrefixes>
<IntParamPrefixes>
<Item>P</Item>
<Item>K</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>M98</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes />
<IntParamPrefixes>
<Item>P</Item>
<Item>L</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
<Item>F</Item>
<Item>S</Item>
<Item>T</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>M99</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes />
<IntParamPrefixes>
<Item>P</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
<Item>F</Item>
<Item>S</Item>
<Item>T</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>M198</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes />
<IntParamPrefixes>
<Item>P</Item>
<Item>L</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
<Item>F</Item>
<Item>S</Item>
<Item>T</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G65</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes>
<Item>A</Item>
<Item>B</Item>
<Item>C</Item>
<Item>D</Item>
<Item>E</Item>
<Item>F</Item>
<Item>H</Item>
<Item>I</Item>
<Item>J</Item>
<Item>K</Item>
<Item>M</Item>
<Item>Q</Item>
<Item>R</Item>
<Item>S</Item>
<Item>T</Item>
<Item>U</Item>
<Item>V</Item>
<Item>W</Item>
<Item>X</Item>
<Item>Y</Item>
<Item>Z</Item>
</FloatParamPrefixes>
<IntParamPrefixes>
<Item>P</Item>
<Item>L</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G66</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes>
<Item>A</Item>
<Item>B</Item>
<Item>C</Item>
<Item>D</Item>
<Item>E</Item>
<Item>F</Item>
<Item>H</Item>
<Item>I</Item>
<Item>J</Item>
<Item>K</Item>
<Item>M</Item>
<Item>Q</Item>
<Item>R</Item>
<Item>S</Item>
<Item>T</Item>
<Item>U</Item>
<Item>V</Item>
<Item>W</Item>
<Item>X</Item>
<Item>Y</Item>
<Item>Z</Item>
</FloatParamPrefixes>
<IntParamPrefixes>
<Item>P</Item>
<Item>L</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<ParameterizedFlagSyntax>
<CategoryPath />
<CodePrefixes>
<Item>G54.1</Item>
</CodePrefixes>
<ParamPrefixes />
<FloatParamPrefixes />
<IntParamPrefixes>
<Item>P</Item>
</IntParamPrefixes>
<VarPrefix>#</VarPrefix>
<TerminateWords>
<Item>G</Item>
<Item>M</Item>
</TerminateWords>
</ParameterizedFlagSyntax>
<FanucGotoParsingSyntax />
<FloatTagValueSyntax>
<VariableTag>#</VariableTag>
<CategoryPath />
<TagList>
<Item>X</Item>
<Item>Y</Item>
<Item>Z</Item>
<Item>U</Item>
<Item>V</Item>
<Item>W</Item>
<Item>A</Item>
<Item>B</Item>
<Item>C</Item>
<Item>I</Item>
<Item>J</Item>
<Item>K</Item>
</TagList>
<AllowEqualsForm>false</AllowEqualsForm>
<RhsDialect>None</RhsDialect>
</FloatTagValueSyntax>
<FloatTagValueSyntax>
<VariableTag>#</VariableTag>
<CategoryPath />
<TagList>
<Item>F</Item>
<Item>S</Item>
<Item>R</Item>
<Item>Q</Item>
<Item>E</Item>
</TagList>
<AllowEqualsForm>false</AllowEqualsForm>
<RhsDialect>None</RhsDialect>
</FloatTagValueSyntax>
<IntegerTagValueSyntax>
<VariableTag>#</VariableTag>
<CategoryPath />
<TagList>
<Item>T</Item>
<Item>D</Item>
<Item>H</Item>
<Item>P</Item>
<Item>L</Item>
</TagList>
<AllowEqualsForm>false</AllowEqualsForm>
<RhsDialect>None</RhsDialect>
</IntegerTagValueSyntax>
<NumberedFlagSyntax>
<CategoryPath>
<Item>Flags</Item>
</CategoryPath>
<CodePrefixes>
<Item>G</Item>
<Item>M</Item>
</CodePrefixes>
<AllowDecimal>true</AllowDecimal>
</NumberedFlagSyntax>
<SnapshotSyntax>
<SectionName>Debug-Parsing</SectionName>
<IsEnabled>false</IsEnabled>
</SnapshotSyntax>
</BundleSyntax>
<BundleSyntax>
<Name>Evaluation</Name>
<FanucMacroCallSyntax />
<SubProgramCallSyntax />
<SubProgramReturnSyntax>
<LabelProbeSyntaxes>
<QuoteCommentSyntax />
<HeadIndexSyntax>
<HeadSymbol>N</HeadSymbol>
</HeadIndexSyntax>
</LabelProbeSyntaxes>
</SubProgramReturnSyntax>
<FanucModalMacroSyntax>
<Phase>Setup</Phase>
</FanucModalMacroSyntax>
<VariableEvaluatorSyntax>
<RuntimeVariableLookups>
<LocalVariableLookup />
<VolatileVariableLookup />
<FanucPositionVariableLookup />
<FanucToolOffsetVariableLookup />
</RuntimeVariableLookups>
<Dialect>Fanuc</Dialect>
</VariableEvaluatorSyntax>
<FanucIfThenSyntax />
<RetainedCommonVariableReadingSyntax />
<VolatileVariableReadingSyntax />
<FanucLocalVariableReadingSyntax />
<FanucSystemControlVariableSyntax />
<FanucWhileDoSyntax />
<FanucGotoSyntax>
<LabelProbeSyntaxes>
<QuoteCommentSyntax />
<HeadIndexSyntax>
<HeadSymbol>N</HeadSymbol>
</HeadIndexSyntax>
</LabelProbeSyntaxes>
</FanucGotoSyntax>
</BundleSyntax>
<BundleSyntax>
<Name>Logic</Name>
<PositioningSyntax />
<UnitModeSyntax>
<InchCodes>
<Item>G20</Item>
</InchCodes>
<MetricCodes>
<Item>G21</Item>
</MetricCodes>
</UnitModeSyntax>
<PlaneSelectSyntax />
<FeedrateSyntax />
<SpindleSpeedSyntax />
<CoolantSyntax />
<FanucPathSmoothingSyntax />
<ToolChangeSyntax />
<ProgramEndSyntax />
<ProgramEndCleanSyntax />
<ProgramStopSyntax />
<IsoG68RotationSyntax />
<IsoG68p2TiltSyntax />
<G53p1RotaryPositionSyntax />
<ToolHeightOffsetSyntax />
<PolarInterpolationSyntax />
<ProgramRxczSyntax />
<McAbcSyntax />
<IsoCoordinateOffsetSyntax />
<IsoLocalCoordinateOffsetSyntax />
<G43p4RtcpSyntax />
<PivotTransformationSyntax />
<CannedCycleResolveSyntax />
<DrillingCycleSyntax />
<PeckDrillingCycleSyntax />
<HighSpeedPeckCycleSyntax />
<BoringCycleSyntax />
<FineBoringSyntax />
<BackBoringSyntax />
<TappingCycleSyntax>
<SupportedCodes>
<Item>G84</Item>
<Item>G74</Item>
</SupportedCodes>
</TappingCycleSyntax>
<IncrementalResolveSyntax>
<Path>Parsing</Path>
<Path>Parsing/G28</Path>
</IncrementalResolveSyntax>
<MachineCoordSelectSyntax>
<SupportedCodes>
<Item>G53</Item>
</SupportedCodes>
</MachineCoordSelectSyntax>
<ProgramXyzSyntax>
<Path>Parsing</Path>
</ProgramXyzSyntax>
<ReferenceReturnSyntax />
<McXyzSyntax />
<McAbcXyzFallbackSyntax />
<McAbcCyclicPathSyntax />
<CircularMotionSyntax />
<LinearMotionSyntax />
<ModalCarrySyntax>
<TrackedKeys>
<Key>TiltTransform</Key>
<Key>PathSmoothing</Key>
<Key>IsoLocalCoordinateOffset</Key>
<Key>CannedCycle</Key>
<Key>MotionState</Key>
<Key>CallStack</Key>
<Key>WhileFrames</Key>
<Key>SiemensLoopFrames</Key>
</TrackedKeys>
</ModalCarrySyntax>
<SnapshotSyntax>
<SectionName>Debug-Logic</SectionName>
<IsEnabled>false</IsEnabled>
</SnapshotSyntax>
</BundleSyntax>
<BundleSyntax>
<Name>PostLogic</Name>
<RadiusCompensationSyntax />
<ModalCarrySyntax>
<TrackedKeys>
<Key>MachineCoordinateState</Key>
</TrackedKeys>
</ModalCarrySyntax>
<FanucModalMacroSyntax>
<Phase>Expansion</Phase>
</FanucModalMacroSyntax>
<SnapshotSyntax>
<SectionName>Debug-PostLogic</SectionName>
<IsEnabled>false</IsEnabled>
</SnapshotSyntax>
</BundleSyntax>
<BundleSyntax>
<Name>Inspection</Name>
<UnconsumedCheckSyntax />
<ProgramXyzBackfillSyntax />
<SnapshotSyntax>
<SectionName>Debug-Inspection</SectionName>
<IsEnabled>false</IsEnabled>
</SnapshotSyntax>
</BundleSyntax>
</NcSyntaxList>
<NcSemanticList>
<CsScriptBeginSemantic />
<ToolChangeSemantic />
<SpindleSpeedSemantic />
<CoolantSemantic />
<McLinearMotionSemantic />
<McArcMotionSemantic />
<McPolarLinearMotionSemantic />
<McPolarArcMotionSemantic />
<ClLinearMcMotionSemantic />
<CompoundMotionSemantic />
<StrokeLimitCheckSemantic />
<CsScriptEndSemantic />
</NcSemanticList>
</SoftNcRunner>
</SoftNcRunner>
<PerCaseNcDependencyList>
<FanucParameterTable>
<System ParamId="1020" Value="3" />
<System ParamId="3741" Value="60000" />
<System ParamId="4002" Value="5" />
<System ParamId="5003" Value="0" />
<System ParamId="5221" Value="37.400000000000006" />
<System ParamId="5222" Value="-97.4" />
<System ParamId="5223" Value="-116.44" />
<System ParamId="5241" Value="0" />
<System ParamId="5242" Value="0" />
<System ParamId="5243" Value="0" />
<System ParamId="5261" Value="0" />
<System ParamId="5262" Value="0" />
<System ParamId="5263" Value="0" />
<System ParamId="5281" Value="0" />
<System ParamId="5282" Value="0" />
<System ParamId="5283" Value="0" />
<System ParamId="5301" Value="0" />
<System ParamId="5302" Value="0" />
<System ParamId="5303" Value="0" />
<System ParamId="5321" Value="0" />
<System ParamId="5322" Value="0" />
<System ParamId="5323" Value="0" />
<System ParamId="7001" Value="0" />
<System ParamId="7002" Value="0" />
<System ParamId="7003" Value="0" />
<System ParamId="7021" Value="0" />
<System ParamId="7022" Value="0" />
<System ParamId="7023" Value="0" />
<System ParamId="7041" Value="0" />
<System ParamId="7042" Value="0" />
<System ParamId="7043" Value="0" />
<System ParamId="7061" Value="0" />
<System ParamId="7062" Value="0" />
<System ParamId="7063" Value="0" />
<System ParamId="7081" Value="0" />
<System ParamId="7082" Value="0" />
<System ParamId="7083" Value="0" />
<System ParamId="7101" Value="0" />
<System ParamId="7102" Value="0" />
<System ParamId="7103" Value="0" />
<System ParamId="7121" Value="0" />
<System ParamId="7122" Value="0" />
<System ParamId="7123" Value="0" />
<System ParamId="7141" Value="0" />
<System ParamId="7142" Value="0" />
<System ParamId="7143" Value="0" />
<System ParamId="7161" Value="0" />
<System ParamId="7162" Value="0" />
<System ParamId="7163" Value="0" />
<System ParamId="7181" Value="0" />
<System ParamId="7182" Value="0" />
<System ParamId="7183" Value="0" />
<System ParamId="7201" Value="0" />
<System ParamId="7202" Value="0" />
<System ParamId="7203" Value="0" />
<System ParamId="7221" Value="0" />
<System ParamId="7222" Value="0" />
<System ParamId="7223" Value="0" />
<System ParamId="7241" Value="0" />
<System ParamId="7242" Value="0" />
<System ParamId="7243" Value="0" />
<System ParamId="7261" Value="0" />
<System ParamId="7262" Value="0" />
<System ParamId="7263" Value="0" />
<System ParamId="7281" Value="0" />
<System ParamId="7282" Value="0" />
<System ParamId="7283" Value="0" />
<System ParamId="7301" Value="0" />
<System ParamId="7302" Value="0" />
<System ParamId="7303" Value="0" />
<System ParamId="7321" Value="0" />
<System ParamId="7322" Value="0" />
<System ParamId="7323" Value="0" />
<System ParamId="7341" Value="0" />
<System ParamId="7342" Value="0" />
<System ParamId="7343" Value="0" />
<System ParamId="7361" Value="0" />
<System ParamId="7362" Value="0" />
<System ParamId="7363" Value="0" />
<System ParamId="7381" Value="0" />
<System ParamId="7382" Value="0" />
<System ParamId="7383" Value="0" />
<System ParamId="7401" Value="0" />
<System ParamId="7402" Value="0" />
<System ParamId="7403" Value="0" />
<System ParamId="7421" Value="0" />
<System ParamId="7422" Value="0" />
<System ParamId="7423" Value="0" />
<System ParamId="7441" Value="0" />
<System ParamId="7442" Value="0" />
<System ParamId="7443" Value="0" />
<System ParamId="7461" Value="0" />
<System ParamId="7462" Value="0" />
<System ParamId="7463" Value="0" />
<System ParamId="7481" Value="0" />
<System ParamId="7482" Value="0" />
<System ParamId="7483" Value="0" />
<System ParamId="7501" Value="0" />
<System ParamId="7502" Value="0" />
<System ParamId="7503" Value="0" />
<System ParamId="7521" Value="0" />
<System ParamId="7522" Value="0" />
<System ParamId="7523" Value="0" />
<System ParamId="7541" Value="0" />
<System ParamId="7542" Value="0" />
<System ParamId="7543" Value="0" />
<System ParamId="7561" Value="0" />
<System ParamId="7562" Value="0" />
<System ParamId="7563" Value="0" />
<System ParamId="7581" Value="0" />
<System ParamId="7582" Value="0" />
<System ParamId="7583" Value="0" />
<System ParamId="7601" Value="0" />
<System ParamId="7602" Value="0" />
<System ParamId="7603" Value="0" />
<System ParamId="7621" Value="0" />
<System ParamId="7622" Value="0" />
<System ParamId="7623" Value="0" />
<System ParamId="7641" Value="0" />
<System ParamId="7642" Value="0" />
<System ParamId="7643" Value="0" />
<System ParamId="7661" Value="0" />
<System ParamId="7662" Value="0" />
<System ParamId="7663" Value="0" />
<System ParamId="7681" Value="0" />
<System ParamId="7682" Value="0" />
<System ParamId="7683" Value="0" />
<System ParamId="7701" Value="0" />
<System ParamId="7702" Value="0" />
<System ParamId="7703" Value="0" />
<System ParamId="7721" Value="0" />
<System ParamId="7722" Value="0" />
<System ParamId="7723" Value="0" />
<System ParamId="7741" Value="0" />
<System ParamId="7742" Value="0" />
<System ParamId="7743" Value="0" />
<System ParamId="7761" Value="0" />
<System ParamId="7762" Value="0" />
<System ParamId="7763" Value="0" />
<System ParamId="7781" Value="0" />
<System ParamId="7782" Value="0" />
<System ParamId="7783" Value="0" />
<System ParamId="7801" Value="0" />
<System ParamId="7802" Value="0" />
<System ParamId="7803" Value="0" />
<System ParamId="7821" Value="0" />
<System ParamId="7822" Value="0" />
<System ParamId="7823" Value="0" />
<System ParamId="7841" Value="0" />
<System ParamId="7842" Value="0" />
<System ParamId="7843" Value="0" />
<System ParamId="7861" Value="0" />
<System ParamId="7862" Value="0" />
<System ParamId="7863" Value="0" />
<System ParamId="7881" Value="0" />
<System ParamId="7882" Value="0" />
<System ParamId="7883" Value="0" />
<System ParamId="7901" Value="0" />
<System ParamId="7902" Value="0" />
<System ParamId="7903" Value="0" />
<System ParamId="7921" Value="0" />
<System ParamId="7922" Value="0" />
<System ParamId="7923" Value="0" />
<System ParamId="7941" Value="0" />
<System ParamId="7942" Value="0" />
<System ParamId="7943" Value="0" />
<Axis ParamId="1240" AxisName="B" Value="0" />
<Axis ParamId="1240" AxisName="C" Value="0" />
<Axis ParamId="1240" AxisName="X" Value="0" />
<Axis ParamId="1240" AxisName="Y" Value="0" />
<Axis ParamId="1240" AxisName="Z" Value="0" />
<Axis ParamId="1300" AxisName="A" Value="INF" />
<Axis ParamId="1300" AxisName="B" Value="INF" />
<Axis ParamId="1300" AxisName="C" Value="INF" />
<Axis ParamId="1300" AxisName="X" Value="INF" />
<Axis ParamId="1300" AxisName="Y" Value="INF" />
<Axis ParamId="1300" AxisName="Z" Value="INF" />
<Axis ParamId="1320" AxisName="A" Value="-INF" />
<Axis ParamId="1320" AxisName="B" Value="-INF" />
<Axis ParamId="1320" AxisName="C" Value="-INF" />
<Axis ParamId="1320" AxisName="X" Value="-INF" />
<Axis ParamId="1320" AxisName="Y" Value="-INF" />
<Axis ParamId="1320" AxisName="Z" Value="-INF" />
<Axis ParamId="1420" AxisName="A" Value="21600" />
<Axis ParamId="1420" AxisName="B" Value="36000" />
<Axis ParamId="1420" AxisName="C" Value="36000" />
<Axis ParamId="1420" AxisName="X" Value="20000" />
<Axis ParamId="1420" AxisName="Y" Value="20000" />
<Axis ParamId="1420" AxisName="Z" Value="20000" />
<Axis ParamId="1006" AxisName="B" Value="1" Type="Int" />
<Axis ParamId="1006" AxisName="C" Value="1" Type="Int" />
<Axis ParamId="1006" AxisName="X" Value="0" Type="Int" />
<Axis ParamId="1006" AxisName="Y" Value="0" Type="Int" />
<Axis ParamId="1006" AxisName="Z" Value="0" Type="Int" />
</FanucParameterTable>
<RetainedCommonVariableTable />
<ToolOffsetTable>
<Entry ID="1">
<ToolOffsetRow IdealHeight_mm="58" AxialWear_mm="0" IdealRadius_mm="6" RadialWear_mm="0" />
</Entry>
</ToolOffsetTable>
</PerCaseNcDependencyList>
</NcRunnerSuit>
</NcRunnerSuit>
<CsvRunnerSuit>
<NcRunnerSuit>
<SoftNcRunner>
<SoftNcRunner>
<PipelineNcDependencyList>
<CsvRunnerConfig>
<LineBeginCsScriptTag>LineBeginCsScript</LineBeginCsScriptTag>
<LineEndCsScriptTag>LineEndCsScript</LineEndCsScriptTag>
<MachineCoordinatePrefix>MC.</MachineCoordinatePrefix>
<CutterLocationPrefix>CL.</CutterLocationPrefix>
<ToolIdTag>ToolId</ToolIdTag>
<SpindleSpeedTag_rpm>SpindleSpeed_rpm</SpindleSpeedTag_rpm>
<SpindleDirectionTag>Spd.Dir.</SpindleDirectionTag>
<FeedrateTag_mmdmin>Feedrate_mmdmin</FeedrateTag_mmdmin>
<DurationTag>StepDuration</DurationTag>
<ActualTimeTag>ActualTime</ActualTimeTag>
<CoolantTag>Coolant</CoolantTag>
</CsvRunnerConfig>
<NcKinematicsDependency />
<StepPropertyAccessDictionaryDependency />
<MappingAnchorDependency />
<FileIndexCounterDependency />
<SentenceIndexCounterDependency />
<SegmenterDependency />
<SyntaxPieceLayerDependency />
</PipelineNcDependencyList>
<Segmenter>
<CsvSegmenter />
</Segmenter>
<NcInitializationList />
<NcSyntaxList>
<BundleSyntax>
<Name>CsvRowToSections</Name>
<CsvRowSyntax />
<RowToTimingSyntax />
<RowToCsScriptSyntax />
<RowToToolingSyntax />
<RowToSpindleSyntax />
<RowToFeedrateSyntax />
<RowToCoolantSyntax />
<RowToMachineCoordinateSyntax />
<RowToMotionEventSyntax />
</BundleSyntax>
</NcSyntaxList>
<NcSemanticList>
<CsScriptBeginSemantic />
<CsvActualTimeSemantic />
<CsvToolingTeleportSemantic />
<SpindleSpeedSemantic />
<CoolantSemantic />
<CsvMotionSemantic />
<CsvActDataSemantic />
<CsScriptEndSemantic />
</NcSemanticList>
</SoftNcRunner>
</SoftNcRunner>
<PerCaseNcDependencyList />
</NcRunnerSuit>
</CsvRunnerSuit>
<ClsfRunnerSuit>
<NcRunnerSuit>
<SoftNcRunner>
<SoftNcRunner>
<PipelineNcDependencyList>
<ClsfRunnerConfig>
<RapidFeedrate_mmdmin>20000</RapidFeedrate_mmdmin>
<RotaryRapidFeedrate_degdmin>36000</RotaryRapidFeedrate_degdmin>
<PreferToolHouse>true</PreferToolHouse>
<ExcludedWords>
<Word>PAINT</Word>
<Word>TOOLNO</Word>
<Word>LOADTL</Word>
<Word>TOOL PATH</Word>
<Word>TOOLPATH</Word>
<Word>END-OF-PATH</Word>
</ExcludedWords>
</ClsfRunnerConfig>
<ToolHouseDependency />
<NcKinematicsDependency />
<MachineAxisConfig>
<Axis Name="X" Type="Linear" />
<Axis Name="Y" Type="Linear" />
<Axis Name="Z" Type="Linear" />
<Axis Name="B" Type="Rotary" />
<Axis Name="C" Type="Rotary" />
</MachineAxisConfig>
<FileIndexCounterDependency />
<SentenceIndexCounterDependency />
<SegmenterDependency />
<SyntaxPieceLayerDependency />
</PipelineNcDependencyList>
<Segmenter>
<ClsfSegmenter />
</Segmenter>
<NcInitializationList />
<NcSyntaxList>
<BundleSyntax>
<Name>ClsfRecordToSections</Name>
<ClsfRecordSyntax />
<ModalCarrySyntax>
<TrackedKeys>
<Key>Msys</Key>
<Key>CutterLocationState</Key>
<Key>ClsfToolData</Key>
<Key>ActiveTool</Key>
<Key>Feedrate</Key>
<Key>SpindleSpeed</Key>
<Key>Coolant</Key>
</TrackedKeys>
</ModalCarrySyntax>
<RecordToMsysSyntax />
<RecordToClMotionSyntax />
<RecordToFeedrateSyntax />
<RecordToSpindleSyntax />
<RecordToCoolantSyntax />
<RecordToToolingSyntax />
<MsysCoordinateOffsetSyntax />
<ClToMcTransformSyntax />
<McXyzSyntax />
<McAbcCyclicPathSyntax />
<ClsfRecordCleanupSyntax />
</BundleSyntax>
</NcSyntaxList>
<NcSemanticList>
<ClsfToolBuildSemantic />
<ToolChangeSemantic />
<SpindleSpeedSemantic />
<CoolantSemantic />
<ClMotionValveSemantic>
<ClSemanticList>
<ClMotionSemantic />
</ClSemanticList>
<McSemanticList>
<McLinearMotionSemantic />
<ClLinearMcMotionSemantic />
<ClArcMcMotionSemantic />
<ClTeleportMcMotionSemantic />
</McSemanticList>
</ClMotionValveSemantic>
</NcSemanticList>
</SoftNcRunner>
</SoftNcRunner>
<PerCaseNcDependencyList />
</NcRunnerSuit>
</ClsfRunnerSuit>
<PlayerCommand>
<ListCommand>
<CommandEntryList>
<EnablingWrapper>
<IsEnabled>true</IsEnabled>
<Command>
<ScriptCommand>
<ScriptTitle>範例 1-1 執行NC檔案</ScriptTitle>
<ScriptText>PlayNcFile("NC/circle.ptp");
// PlayNcFile("NC/drill_slot.ptp");
// PlayNcFile("NC/side.ptp");
// PlayNcFile("NC/slide.ptp");</ScriptText>
</ScriptCommand>
</Command>
</EnablingWrapper>
<EnablingWrapper>
<IsEnabled>false</IsEnabled>
<Command>
<ScriptCommand>
<ScriptTitle>範例 1-2 基礎設定 及 執行NC檔案</ScriptTitle>
<ScriptText>////一般設定////
DispCache_Mb = 1260; //GRAM暫存空間 (Mb)
MachiningResolution_mm = 0.125; //仿真解析度 (mm)
MachiningMotionResolution = FeedPerCycle;
EnableCollisionDetection = true; //是否啟用碰撞檢測開啟
EnablePauseOnCollision = false; //是否啟用碰撞發生時暫停
////執行NC檔案////
PlayNcFile("NC/circle.ptp");
PlayNcFile("NC/drill_slot.ptp");
PlayNcFile("NC/side.ptp");
PlayNcFile("NC/slide.ptp");</ScriptText>
</ScriptCommand>
</Command>
</EnablingWrapper>
<EnablingWrapper>
<IsEnabled>false</IsEnabled>
<Command>
<ScriptCommand>
<ScriptTitle>範例 1-3 穿插設定於NC檔案間</ScriptTitle>
<ScriptText>////一般設定////
DispCache_Mb = 260; //GRAM暫存空間 (Mb)
MachiningResolution_mm = 1.0; //仿真解析度 (mm)
MachiningMotionResolution = FeedPerCycle;
EnableCollisionDetection = true; //是否啟用碰撞檢測開啟
EnablePauseOnCollision = false; //是否啟用碰撞發生時暫停
PlayNcFile("NC/circle.ptp");
EnableCollisionDetection = false;
PlayNcFile("NC/drill_slot.ptp");
MachiningResolution_mm = 1.0/8;
PlayNcFile("NC/side.ptp");
PlayNcFile("NC/slide.ptp");</ScriptText>
</ScriptCommand>
</Command>
</EnablingWrapper>
<EnablingWrapper>
<IsEnabled>false</IsEnabled>
<Command>
<ScriptCommand>
<ScriptTitle>範例 2-1 優化NC</ScriptTitle>
<ScriptText>////一般設定////
DispCache_Mb = 260; //GRAM暫存空間 (Mb)
MachiningResolution_mm = 1.0; //仿真解析度 (mm)
MachiningMotionResolution = FeedPerCycle;
EnableCollisionDetection = false; //是否啟用碰撞檢測開啟
EnablePauseOnCollision = false; //是否啟用碰撞發生時暫停
////NC優化設定////
OptEnableInterpolation = true; //是否要重新插補，增加路徑線段加減速
OptRapidFeed_mmdmin = 4000; //無切削區域進給
OptMinFeedrate_mmdmin = 100; //有切削區域最小進給
OptMaxFeedrate_mmdmin = 4000; //有切削區域最大進給
OptMaxAcceleration_mmds2 = 10; //加減速限制
OptExtendedPreDistance_mm = 3; //有切削區域等效計算的前長度
OptExtendedPostDistance_mm = 2; //有切削區域等效計算的後長度
OptSpindlePowerSafetyFactor = 1.5; //主軸功率安全係數
OptSpindleTorqueSafetyFactor = 1.5; //主軸扭力安全係數
OptPreferedForce_N = double.PositiveInfinity; //優化目標力
////執行NC檔案////
PlayNcFile("NC/circle.ptp");
PlayNcFile("NC/drill_slot.ptp");
PlayNcFile("NC/side.ptp");
PlayNcFile("NC/slide.ptp");
OptimizeToFiles("Cache/Opt-[NcName]"); //優化NC檔並以路徑樣板輸出
</ScriptText>
</ScriptCommand>
</Command>
</EnablingWrapper>
<EnablingWrapper>
<IsEnabled>false</IsEnabled>
<Command>
<ScriptCommand>
<ScriptTitle>範例 3 其他各式指令</ScriptTitle>
<ScriptText>////一般設定////
DispCache_Mb = 260; //GRAM暫存空間 (Mb)
MachiningResolution_mm = 1.0; //仿真解析度 (mm)
MachiningMotionResolution = FeedPerCycle;
EnableCollisionDetection = false; //是否啟用碰撞檢測開啟
EnablePauseOnCollision = false; //是否啟用碰撞發生時暫停
WriteRuntimeGeom("Cache/init.wct"); //寫入暫存檔
////執行NC檔案////
PlayNcFile("NC/circle.ptp");
PlayNcFile("NC/drill_slot.ptp");
PlayNcFile("NC/side.ptp");
PlayNcFile("NC/slide.ptp");
WriteRuntimeGeom("Cache/finish.wct"); //寫入暫存檔
WriteRuntimeGeomToStl("Cache/finish.stl",0)
WriteStepFiles("Cache/[NcName].step.csv");
WriteShotFiles("Cache/[NcName].shot.csv", 1);
</ScriptText>
</ScriptCommand>
</Command>
</EnablingWrapper>
<EnablingWrapper>
<IsEnabled>false</IsEnabled>
<Command>
<ScriptCommand>
<ScriptTitle>範例 4 補充腳本</ScriptTitle>
<ScriptText>////一般設定////
DispCache_Mb = 2260; //GRAM暫存空間 (Mb)
WriteRuntimeGeom("Cache/finish-2.wct"); //寫入暫存檔
//Diff(1); //執行和成品誤差比對</ScriptText>
</ScriptCommand>
</Command>
</EnablingWrapper>
</CommandEntryList>
</ListCommand>
</PlayerCommand>
<TimeMapping>
<TimeMapping>
<Entrys />
</TimeMapping>
</TimeMapping>
<MachiningActRunnerConfig>
<MachiningActRunnerConfig>
<EnableStrokeLimitCheck>true</EnableStrokeLimitCheck>
<EnableCollisionDetection>true</EnableCollisionDetection>
<EnablePauseOnFailure>false</EnablePauseOnFailure>
<EnablePhysics>true</EnablePhysics>
<EnableWearEffect>false</EnableWearEffect>
<EnableDeflectionTransformation>false</EnableDeflectionTransformation>
<MachiningMotionResolution>
<FeedPerCycleMachiningMotionResolution>
<Scale>1</Scale>
<MinLinearResolution_mm>0</MinLinearResolution_mm>
</FeedPerCycleMachiningMotionResolution>
</MachiningMotionResolution>
<InitSpindleTemperature_C>35</InitSpindleTemperature_C>
<IsIdealOffsetDependentOnToolHouse>true</IsIdealOffsetDependentOnToolHouse>
</MachiningActRunnerConfig>
</MachiningActRunnerConfig>
<InspectingKey>MaxTipDeflectionOnToolRunningCoordinate_um.Y</InspectingKey>
<MillingGuide>
<MillingGuide>
<DictionaryColorGuide>
<DictionaryColorGuide>
<SelectedKey>MaxTipDeflectionOnToolRunningCoordinate_um.Y</SelectedKey>
<KeyToColorGuide>
<Entry Key="Feedrate_mmdmin">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>2000</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="DeltaTipDeflectionOnToolRunningCoordinate_um.Y">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="MaxTipDeflectionOnToolRunningCoordinate_um.Y">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
<Floor>-0.1</Floor>
<Ceiling>0.5</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="MaxTipDeflectionOnToolRunningCoordinate_um.X">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="MaxTipDeflectionOnToolRunningCoordinate_um.Z">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>-0.3</Floor>
<Ceiling>0.3</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="AvgAbsTorque_Nm">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
</KeyToColorGuide>
</DictionaryColorGuide>
</DictionaryColorGuide>
<ForceWCycleLineDivConfig>
<ForceCycleLineDivConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>-400</Min>
<Max>400</Max>
</VRange>
<MainForceCycleFlag>ForceToWorkpieceOnProgramCoordinate</MainForceCycleFlag>
</ForceCycleLineDivConfig>
</ForceWCycleLineDivConfig>
<SimSpindleMomentCycleLineDivConfig>
<SpindleMomentCycleLineDivConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>-10</Min>
<Max>10</Max>
</VRange>
</TimeChartYConfig>
</SpindleMomentCycleLineDivConfig>
</SimSpindleMomentCycleLineDivConfig>
<SensorSpindleMomentCycleLineDivConfig>
<SpindleMomentCycleLineDivConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>-10</Min>
<Max>10</Max>
</VRange>
</TimeChartYConfig>
</SpindleMomentCycleLineDivConfig>
</SensorSpindleMomentCycleLineDivConfig>
<ClStripChartConfig>
<ClStripChartConfig>
<ItemConfigDictionary>
<Entry Key="Feedrate_mmdmin">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="DeltaTipDeflectionOnToolRunningCoordinate_um.Y">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="MaxTipDeflectionOnToolRunningCoordinate_um.Y">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="MaxTipDeflectionOnToolRunningCoordinate_um.X">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="MaxTipDeflectionOnToolRunningCoordinate_um.Z">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="AvgAbsTorque_Nm">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
</ItemConfigDictionary>
</ClStripChartConfig>
</ClStripChartConfig>
</MillingGuide>
</MillingGuide>
</MachiningProject>
Reference in New Issue View Git Blame Copy Permalink