diff --git a/Main.hincproj b/Main.hincproj
index 63bf99f..f5bb8b8 100644
--- a/Main.hincproj
+++ b/Main.hincproj
@@ -1,5 +1,5 @@
 <?xml version="1.0" encoding="utf-8"?>
-<MillingCourse ApiVersion="1.3.428.0">
+<MillingCourse ApiVersion="1.3.430.0">
   <MillingEquipment>
     <MachiningEquipment>
       <SolidMachiningChain>
@@ -98,6 +98,7 @@
               <XmlSource>WC-Co6-800nm.CutterMaterial</XmlSource>
             </BodyMaterial>
             <CoatingMaterial />
+            <CutterMass_g>7</CutterMass_g>
             <HoneRadius_um>20</HoneRadius_um>
             <MillingCutterOptLimit>
               <MillingCutterOptLimit>
@@ -132,10 +133,17 @@
         <Workpiece>
           <Resolution>0.5</Resolution>
           <RawGeom>
-            <Box3d>
-              <Min>(2, 0, -50)</Min>
-              <Max>(72, 50, 0)</Max>
-            </Box3d>
+            <TransformationGeom>
+              <Transformer>
+                <StaticTranslation Trans="(0, 0, 0)" />
+              </Transformer>
+              <Geom>
+                <Box3d>
+                  <Min>(2, 0, -50)</Min>
+                  <Max>(72, 50, 0)</Max>
+                </Box3d>
+              </Geom>
+            </TransformationGeom>
           </RawGeom>
           <FixtureToGeomTransformer>
             <StaticTranslation Trans="(-35, -25, 50)" />
@@ -146,7 +154,7 @@
                 <StaticTranslation Trans="(2, 0, -50)" />
               </Transformer>
               <Geom>
-                <StlFile>Design\standard_force_4exp_201902_design.stl</StlFile>
+                <StlFile>Design/standard_force_4exp_201902_design.stl</StlFile>
               </Geom>
             </TransformationGeom>
           </IdealGeom>
@@ -246,6 +254,7 @@
                 <XmlSource>WC-Co6-800nm.CutterMaterial</XmlSource>
               </BodyMaterial>
               <CoatingMaterial />
+              <CutterMass_g>7</CutterMass_g>
               <HoneRadius_um>20</HoneRadius_um>
               <MillingCutterOptLimit>
                 <MillingCutterOptLimit>
diff --git a/WC-Co6-800nm.CutterMaterial b/WC-Co6-800nm.CutterMaterial
index b5f6f69..24d25a4 100644
--- a/WC-Co6-800nm.CutterMaterial
+++ b/WC-Co6-800nm.CutterMaterial
@@ -7,7 +7,6 @@
   <HeatTransferCoefficient_WdmK>70</HeatTransferCoefficient_WdmK>
   <HeatCapacity_JdgK>0.34</HeatCapacity_JdgK>
   <Density_gdcm3>14.95</Density_gdcm3>
-  <CutterMass_g>7</CutterMass_g>
   <CutterDermis_mm>0.01</CutterDermis_mm>
   <MeltingTemperature_K>3143.16</MeltingTemperature_K>
   <FusionLatentHeat_Jdg>400</FusionLatentHeat_Jdg>