From 763d499456b61b231be328c7f57883262db23eac Mon Sep 17 00:00:00 2001
From: iambossTC <iamboss@superhightech.com.tw>
Date: Tue, 16 Jul 2024 13:14:31 +0800
Subject: [PATCH] tune

---
 Main.hincproj             | 106 ++++++++++++++++++++++++++++++++++----
 PmcB1s/PMC_B1.mt          |   4 +-
 Script/{Run.cs => Exp.cs} |   0
 Script/Run-CSV.cs         |  13 +++++
 4 files changed, 110 insertions(+), 13 deletions(-)
 rename Script/{Run.cs => Exp.cs} (100%)
 create mode 100644 Script/Run-CSV.cs

diff --git a/Main.hincproj b/Main.hincproj
index c931a09..63bf99f 100644
--- a/Main.hincproj
+++ b/Main.hincproj
@@ -24,6 +24,97 @@
           </SpindleSpeedToTorque--RPM-to-Nm>
         </SpindleCapability>
       </SpindleCapability>
+      <StickMachiningTool>
+        <Note>T1</Note>
+        <Holder>
+          <StickHolder>
+            <Cylindroid LongitudeNum="12">
+              <PairZr>(0,10)</PairZr>
+              <PairZr>(50,10)</PairZr>
+            </Cylindroid>
+            <Note></Note>
+          </StickHolder>
+        </Holder>
+        <Cutter>
+          <MillingCutter>
+            <ShaperProfile>
+              <AptProfile>
+                <Apt>
+                  <ColumnApt>
+                    <D>12</D>
+                    <Rc>0.5</Rc>
+                    <FluteH>40</FluteH>
+                  </ColumnApt>
+                </Apt>
+              </AptProfile>
+            </ShaperProfile>
+            <InnerBeamProfile>
+              <FluteDependentRatioProfile>
+                <!--<ConstRatioProfile>
+  <RadiusRatio />
+</ConstRatioProfile>-->
+              </FluteDependentRatioProfile>
+            </InnerBeamProfile>
+            <UpperBeamGeom>
+              <TransformationGeom>
+                <Transformer />
+                <Geom>
+                  <Cylindroid LongitudeNum="12">
+                    <PairZr>(40,6)</PairZr>
+                    <PairZr>(80,6)</PairZr>
+                  </Cylindroid>
+                </Geom>
+              </TransformationGeom>
+            </UpperBeamGeom>
+            <LinearResolution_mm>0.5</LinearResolution_mm>
+            <AngleResolution_deg>15</AngleResolution_deg>
+            <FluteContourTray>
+              <UniformContourTray>
+                <TrackNum>3</TrackNum>
+                <BaselineOneContour>
+                  <FluteContour>
+                    <SetupAngle_deg>0</SetupAngle_deg>
+                    <BaseSideContour>
+                      <ConstHelixSideContour>
+                        <Helix_deg>50</Helix_deg>
+                        <RadialRakeAngle_deg>15</RadialRakeAngle_deg>
+                        <RadialReliefAngle_deg>5</RadialReliefAngle_deg>
+                      </ConstHelixSideContour>
+                    </BaseSideContour>
+                    <BaseBottomContour>
+                      <SlideBottomContour>
+                        <AxialRakeAngle_deg>50</AxialRakeAngle_deg>
+                        <DiskAngle_deg>1.5</DiskAngle_deg>
+                        <EccentricAngle_deg>15</EccentricAngle_deg>
+                        <CutterLengthOnBottomProjection_mm>5</CutterLengthOnBottomProjection_mm>
+                        <OuterRadius_mm>5.5</OuterRadius_mm>
+                      </SlideBottomContour>
+                    </BaseBottomContour>
+                  </FluteContour>
+                </BaselineOneContour>
+              </UniformContourTray>
+            </FluteContourTray>
+            <BodyMaterial>
+              <XmlSource>WC-Co6-800nm.CutterMaterial</XmlSource>
+            </BodyMaterial>
+            <CoatingMaterial />
+            <HoneRadius_um>20</HoneRadius_um>
+            <MillingCutterOptLimit>
+              <MillingCutterOptLimit>
+                <EnableOpt>true</EnableOpt>
+                <YieldingSafetyFactor>3</YieldingSafetyFactor>
+                <EnableLimitByMinimumUncutChipThickness>true</EnableLimitByMinimumUncutChipThickness>
+                <MinFeedPerTooth_mm>0</MinFeedPerTooth_mm>
+                <MaxFeedPerTooth_mm>999</MaxFeedPerTooth_mm>
+              </MillingCutterOptLimit>
+            </MillingCutterOptLimit>
+          </MillingCutter>
+        </Cutter>
+        <PreservedDistanceBetweenFluteAndSpindleNose_mm>8</PreservedDistanceBetweenFluteAndSpindleNose_mm>
+        <ObservationAnchorReference>HolderAnc</ObservationAnchorReference>
+        <RelativeHeightFromObservationAnchor_mm>0</RelativeHeightFromObservationAnchor_mm>
+        <ObservationRingRadius_mm>0</ObservationRingRadius_mm>
+      </StickMachiningTool>
       <Fixture>
         <Fixture>
           <Solid>
@@ -123,8 +214,8 @@
                   </Geom>
                 </TransformationGeom>
               </UpperBeamGeom>
-              <LinearResolution_mm>0.1</LinearResolution_mm>
-              <AngleResolution_deg>5</AngleResolution_deg>
+              <LinearResolution_mm>0.5</LinearResolution_mm>
+              <AngleResolution_deg>15</AngleResolution_deg>
               <FluteContourTray>
                 <UniformContourTray>
                   <TrackNum>3</TrackNum>
@@ -263,7 +354,7 @@
                   <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                   <RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
                   <Floor>0</Floor>
-                  <Ceiling>1</Ceiling>
+                  <Ceiling>2000</Ceiling>
                 </RangeColorRule>
               </FuncRangeColorGuide>
             </Entry>
@@ -354,12 +445,5 @@
       <RakeFaceCuttingPara />
     </ResultParaTemplate>
   </MillingTraining>
-  <CsScriptText>IEnumerable&lt;Action&gt; Run(){
-    foreach(var action in RunNcFile("NC/circle.ptp")) yield return action;
-    foreach(var action in RunNcFile("NC/drill_slot.ptp")) yield return action;
-    foreach(var action in RunNcFile("NC/side.ptp")) yield return action;
-    foreach(var action in RunNcFile("NC/slide.ptp")) yield return action;
-    yield return null;
-}
-return Run();</CsScriptText>
+  <CsScriptRelFile>Script/Run-CSV.cs</CsScriptRelFile>
 </MillingCourse>
\ No newline at end of file
diff --git a/PmcB1s/PMC_B1.mt b/PmcB1s/PMC_B1.mt
index bb4d363..27fb506 100644
--- a/PmcB1s/PMC_B1.mt
+++ b/PmcB1s/PMC_B1.mt
@@ -5,10 +5,10 @@
       <ChainCode>[O][Y][X][C][w];[O][Z][B][S][t]</ChainCode>
       <IsVertical>true</IsVertical>
       <TransformerX>
-        <DynamicTranslation Axis="(-1, 0, 0)" Len="0" />
+        <DynamicTranslation Axis="(-1, 0, 0)" Len="29.596000000000004" />
       </TransformerX>
       <TransformerY>
-        <DynamicTranslation Axis="(0, -1, 0)" Len="0" />
+        <DynamicTranslation Axis="(0, -1, 0)" Len="-37.400000000000006" />
       </TransformerY>
       <TransformerZ>
         <DynamicTranslation Axis="(0, 0, 1)" Len="0" />
diff --git a/Script/Run.cs b/Script/Exp.cs
similarity index 100%
rename from Script/Run.cs
rename to Script/Exp.cs
diff --git a/Script/Run-CSV.cs b/Script/Run-CSV.cs
new file mode 100644
index 0000000..e11936c
--- /dev/null
+++ b/Script/Run-CSV.cs
@@ -0,0 +1,13 @@
+IEnumerable<Action> Run(){
+    // foreach(var action in RunNcFile("NC/circle.ptp")) yield return action;
+    // foreach(var action in RunNcFile("NC/drill_slot.ptp")) yield return action;
+    // foreach(var action in RunNcFile("NC/side.ptp")) yield return action;
+    // foreach(var action in RunNcFile("NC/slide.ptp")) yield return action;
+    
+    // WriteStepFile("Cache/[NcName].step.csv");
+    RegisterStepVariable("TestData","TestData",null,"G");
+    ReadCsv("Cache/side.demo.csv");
+    
+    yield return null;
+}
+return Run();
\ No newline at end of file