diff --git a/HiNC.20210505.exe b/HiNC.20210604.exe
similarity index 99%
rename from HiNC.20210505.exe
rename to HiNC.20210604.exe
index 7d5670c..ba670a0 100644
Binary files a/HiNC.20210505.exe and b/HiNC.20210604.exe differ
diff --git a/csv.player b/csv.player
new file mode 100644
index 0000000..996e82a
--- /dev/null
+++ b/csv.player
@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="utf-8"?>
+<FilePlayer>
+  <FilePlayee>
+    <UniversalNcFileRunner>
+      <IsReplacingDefaultSpindleSpeedbyCodeSpindleSpeed>true</IsReplacingDefaultSpindleSpeedbyCodeSpindleSpeed>
+      <EnableCutterLocationDataToStep>true</EnableCutterLocationDataToStep>
+      <EnableEmbedingGeomDataToStep>true</EnableEmbedingGeomDataToStep>
+      <EnableEmbedingForceDataToStep>true</EnableEmbedingForceDataToStep>
+    </UniversalNcFileRunner>
+  </FilePlayee>
+  <NumericalFiles>
+    <File>NC\slide.ptp.steps.csv</File>
+    <File>NC\circle.ptp.steps.csv</File>
+    <File>NC\side.ptp.steps.csv</File>
+    <File>NC\drill_slot.ptp.steps.csv</File>
+  </NumericalFiles>
+</FilePlayer>
\ No newline at end of file
diff --git a/demo.hincproj b/demo.hincproj
index 4e58448..d4419fa 100644
--- a/demo.hincproj
+++ b/demo.hincproj
@@ -1,5 +1,5 @@
 <?xml version="1.0" encoding="utf-8"?>
-<IntegratedMillingProc ApiVersion="HiNcWpf.1.3.73.0">
+<IntegratedMillingProc ApiVersion="HiNcWpf.1.3.87.0">
   <ProjectName></ProjectName>
   <MillingProc>
     <MillingEquipment>
@@ -7,6 +7,38 @@
         <SolidMachiningChainSource>
           <XmlSource>PmcB1s\PMC_B1.mt</XmlSource>
         </SolidMachiningChainSource>
+        <MillingTool>
+          <Note>T1</Note>
+          <Holder>
+            <XmlSource>D10H10.holder</XmlSource>
+          </Holder>
+          <Cutter>
+            <AptCutter>
+              <AptGetter>
+                <BullNoseApt>
+                  <D>12</D>
+                  <R0>0.5</R0>
+                  <FluteH>40</FluteH>
+                  <FullH>40</FullH>
+                </BullNoseApt>
+              </AptGetter>
+              <Sculp>
+                <ConstHelixSculp>
+                  <FluteNum>3</FluteNum>
+                  <Helix_deg>50</Helix_deg>
+                  <MillingParaGridSource>
+                    <MillingParaGridFile>
+                      <File>MillingParaGrids\Al6061T6_201902.mp.xml</File>
+                    </MillingParaGridFile>
+                  </MillingParaGridSource>
+                </ConstHelixSculp>
+              </Sculp>
+              <LatitudeNum>6</LatitudeNum>
+              <!--LongtitudeNum should be the multiple of 4.-->
+              <LongtitudeNum>12</LongtitudeNum>
+            </AptCutter>
+          </Cutter>
+        </MillingTool>
         <Fixture>
           <Fixture>
             <Solid>
@@ -110,7 +142,7 @@
       <CutterFulcrumReference>HolderShankBuckle</CutterFulcrumReference>
     </CuttingFulcrum>
   </MillingProc>
-  <ColorGuide>
+  <ColorGuideSource>
     <FilteredColorGuide>
       <FilterColorGuide>
         <TraditionalNcMinorColorGuide />
@@ -124,6 +156,7 @@
           <Entry Key="StepIndex">
             <FreeColorGuide QuantityKey="StepIndex">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000000</Ceil>
@@ -133,6 +166,7 @@
           <Entry Key="Feedrate_mmdmin">
             <FreeColorGuide QuantityKey="Feedrate_mmdmin">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>10000</Ceil>
@@ -142,6 +176,7 @@
           <Entry Key="SpindleSpeed_rpm">
             <FreeColorGuide QuantityKey="SpindleSpeed_rpm">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>10000</Ceil>
@@ -151,6 +186,7 @@
           <Entry Key="RadialWidth">
             <FreeColorGuide QuantityKey="RadialWidth">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>100</Ceil>
@@ -160,6 +196,7 @@
           <Entry Key="AxialDepth">
             <FreeColorGuide QuantityKey="AxialDepth">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>100</Ceil>
@@ -169,6 +206,7 @@
           <Entry Key="Mrr_mm3ds">
             <FreeColorGuide QuantityKey="Mrr_mm3ds">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>10000</Ceil>
@@ -178,6 +216,7 @@
           <Entry Key="AbsAvgForce">
             <FreeColorGuide QuantityKey="AbsAvgForce">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -187,6 +226,7 @@
           <Entry Key="MaxAbsForce">
             <FreeColorGuide QuantityKey="MaxAbsForce">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -196,6 +236,7 @@
           <Entry Key="MaxAbsForceSlope_NdDeg">
             <FreeColorGuide QuantityKey="MaxAbsForceSlope_NdDeg">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>10</Ceil>
@@ -205,6 +246,7 @@
           <Entry Key="MaxAxialTorqueToToolByToolTip_Nmm">
             <FreeColorGuide QuantityKey="MaxAxialTorqueToToolByToolTip_Nmm">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -214,6 +256,7 @@
           <Entry Key="AxialPower_w">
             <FreeColorGuide QuantityKey="AxialPower_w">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -223,6 +266,7 @@
           <Entry Key="MaxAbsTorqueByKeyFulcrum_Nmm">
             <FreeColorGuide QuantityKey="MaxAbsTorqueByKeyFulcrum_Nmm">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -232,6 +276,7 @@
           <Entry Key="AvgForceToToolOnToolRunningCoordinate.X">
             <FreeColorGuide QuantityKey="AvgForceToToolOnToolRunningCoordinate.X">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -241,6 +286,7 @@
           <Entry Key="AvgForceToToolOnToolRunningCoordinate.Y">
             <FreeColorGuide QuantityKey="AvgForceToToolOnToolRunningCoordinate.Y">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -250,6 +296,7 @@
           <Entry Key="AvgForceToToolOnToolRunningCoordinate.Z">
             <FreeColorGuide QuantityKey="AvgForceToToolOnToolRunningCoordinate.Z">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -259,6 +306,7 @@
           <Entry Key="AvgForceToWorkpieceOnWorkpieceCoordinate.X">
             <FreeColorGuide QuantityKey="AvgForceToWorkpieceOnWorkpieceCoordinate.X">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -268,6 +316,7 @@
           <Entry Key="AvgForceToWorkpieceOnWorkpieceCoordinate.Y">
             <FreeColorGuide QuantityKey="AvgForceToWorkpieceOnWorkpieceCoordinate.Y">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -277,6 +326,7 @@
           <Entry Key="AvgForceToWorkpieceOnWorkpieceCoordinate.Z">
             <FreeColorGuide QuantityKey="AvgForceToWorkpieceOnWorkpieceCoordinate.Z">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -286,6 +336,7 @@
           <Entry Key="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.X">
             <FreeColorGuide QuantityKey="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.X">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -295,6 +346,7 @@
           <Entry Key="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.Y">
             <FreeColorGuide QuantityKey="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.Y">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -304,6 +356,7 @@
           <Entry Key="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.Z">
             <FreeColorGuide QuantityKey="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.Z">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -313,62 +366,12 @@
         </ColorGuideDictionary>
       </DictionaryColorGuide>
     </FilteredColorGuide>
-  </ColorGuide>
+  </ColorGuideSource>
   <NumericalPlayerSource>
-    <FilePlayer>
-      <FilePlayee>
-        <TraditionalNcRunner>
-          <NcEnv>
-            <CncBrand>Fanuc</CncBrand>
-            <McHome>(0,0,0)</McHome>
-            <CoordinateTable>
-              <!--The ID is G code flag multiplying 1000. For example, ID of G54 is 54000.-->
-              <Entry ID="54000" Offset="(37.400000000000006,-97.4,-116.44)" />
-              <Entry ID="55000" Offset="(0,0,0)" />
-              <Entry ID="56000" Offset="(0,0,0)" />
-              <Entry ID="57000" Offset="(0,0,0)" />
-              <Entry ID="58000" Offset="(0,0,0)" />
-              <Entry ID="59000" Offset="(0,0,0)" />
-              <Entry ID="59100" Offset="(0,0,0)" />
-              <Entry ID="59200" Offset="(0,0,0)" />
-              <Entry ID="59300" Offset="(0,0,0)" />
-              <Entry ID="59400" Offset="(0,0,0)" />
-              <Entry ID="59500" Offset="(0,0,0)" />
-              <Entry ID="59600" Offset="(0,0,0)" />
-              <Entry ID="59700" Offset="(0,0,0)" />
-              <Entry ID="59800" Offset="(0,0,0)" />
-              <Entry ID="59900" Offset="(0,0,0)" />
-            </CoordinateTable>
-            <MillingToolOffsetTable>
-              <Entry ID="1">
-                <MillingToolOffsetTableRow>
-                  <RadialIdealLen>12</RadialIdealLen>
-                  <RadialWear>0</RadialWear>
-                  <AxialIdealLen>50</AxialIdealLen>
-                  <AxialWear>0</AxialWear>
-                </MillingToolOffsetTableRow>
-              </Entry>
-            </MillingToolOffsetTable>
-            <EnableShortestRotary>true</EnableShortestRotary>
-            <MaxRotarySpeed_rpm>60</MaxRotarySpeed_rpm>
-            <RapidFeedrate_mmdmin>20000</RapidFeedrate_mmdmin>
-            <ToolingTime_s>0</ToolingTime_s>
-          </NcEnv>
-          <NcProc>
-            <LinearResolution_mm>1</LinearResolution_mm>
-            <RotaryResolution_deg>15</RotaryResolution_deg>
-          </NcProc>
-        </TraditionalNcRunner>
-      </FilePlayee>
-      <NumericalFiles>
-        <File>NC\circle.ptp</File>
-        <File>NC\drill_slot.ptp</File>
-        <File>NC\side.ptp</File>
-        <File>NC\slide.ptp</File>
-      </NumericalFiles>
-    </FilePlayer>
+    <XmlSource>fanuc.player</XmlSource>
   </NumericalPlayerSource>
   <DispCacheMb>260</DispCacheMb>
+  <IsShowingDimensionBar>true</IsShowingDimensionBar>
   <EnablePauseOnCollision>true</EnablePauseOnCollision>
   <EnableResetOnStart>true</EnableResetOnStart>
   <OutputPath>[OldFile].steps.csv</OutputPath>
diff --git a/demo2.hincproj b/demo2.hincproj
index 1895079..fd844a4 100644
--- a/demo2.hincproj
+++ b/demo2.hincproj
@@ -1,5 +1,5 @@
 <?xml version="1.0" encoding="utf-8"?>
-<IntegratedMillingProc ApiVersion="HiNcWpf.1.3.74.0">
+<IntegratedMillingProc ApiVersion="HiNcWpf.1.3.87.0">
   <ProjectName></ProjectName>
   <MillingProc>
     <MillingEquipment>
@@ -7,38 +7,6 @@
         <SolidMachiningChainSource>
           <XmlSource>PmcB1s\PMC_B1.mt</XmlSource>
         </SolidMachiningChainSource>
-        <MillingTool>
-          <Note>T1</Note>
-          <Holder>
-            <XmlSource>D10H10.holder</XmlSource>
-          </Holder>
-          <Cutter>
-            <AptCutter>
-              <AptGetter>
-                <BullNoseApt>
-                  <D>12</D>
-                  <R0>0.5</R0>
-                  <FluteH>40</FluteH>
-                  <FullH>40</FullH>
-                </BullNoseApt>
-              </AptGetter>
-              <Sculp>
-                <ConstHelixSculp>
-                  <FluteNum>3</FluteNum>
-                  <Helix_deg>50</Helix_deg>
-                  <MillingParaGridSource>
-                    <MillingParaGridFile>
-                      <File>MillingParaGrids\Al6061T6_201902.mp.xml</File>
-                    </MillingParaGridFile>
-                  </MillingParaGridSource>
-                </ConstHelixSculp>
-              </Sculp>
-              <LatitudeNum>6</LatitudeNum>
-              <!--LongtitudeNum should be the multiple of 4.-->
-              <LongtitudeNum>12</LongtitudeNum>
-            </AptCutter>
-          </Cutter>
-        </MillingTool>
         <Fixture>
           <Fixture>
             <Solid>
@@ -142,7 +110,7 @@
       <CutterFulcrumReference>HolderShankBuckle</CutterFulcrumReference>
     </CuttingFulcrum>
   </MillingProc>
-  <ColorGuide>
+  <ColorGuideSource>
     <FilteredColorGuide>
       <FilterColorGuide>
         <UniversalNcMinorColorGuide>
@@ -158,6 +126,7 @@
           <Entry Key="StepIndex">
             <FreeColorGuide QuantityKey="StepIndex">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000000</Ceil>
@@ -167,6 +136,7 @@
           <Entry Key="Feedrate_mmdmin">
             <FreeColorGuide QuantityKey="Feedrate_mmdmin">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>10000</Ceil>
@@ -176,6 +146,7 @@
           <Entry Key="SpindleSpeed_rpm">
             <FreeColorGuide QuantityKey="SpindleSpeed_rpm">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>10000</Ceil>
@@ -185,6 +156,7 @@
           <Entry Key="RadialWidth">
             <FreeColorGuide QuantityKey="RadialWidth">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>100</Ceil>
@@ -194,6 +166,7 @@
           <Entry Key="AxialDepth">
             <FreeColorGuide QuantityKey="AxialDepth">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>100</Ceil>
@@ -203,6 +176,7 @@
           <Entry Key="Mrr_mm3ds">
             <FreeColorGuide QuantityKey="Mrr_mm3ds">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>10000</Ceil>
@@ -212,6 +186,7 @@
           <Entry Key="AbsAvgForce">
             <FreeColorGuide QuantityKey="AbsAvgForce">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -221,6 +196,7 @@
           <Entry Key="MaxAbsForce">
             <FreeColorGuide QuantityKey="MaxAbsForce">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -230,6 +206,7 @@
           <Entry Key="MaxAbsForceSlope_NdDeg">
             <FreeColorGuide QuantityKey="MaxAbsForceSlope_NdDeg">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>10</Ceil>
@@ -239,6 +216,7 @@
           <Entry Key="MaxAxialTorqueToToolByToolTip_Nmm">
             <FreeColorGuide QuantityKey="MaxAxialTorqueToToolByToolTip_Nmm">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -248,6 +226,7 @@
           <Entry Key="AxialPower_w">
             <FreeColorGuide QuantityKey="AxialPower_w">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -257,6 +236,7 @@
           <Entry Key="MaxAbsTorqueByKeyFulcrum_Nmm">
             <FreeColorGuide QuantityKey="MaxAbsTorqueByKeyFulcrum_Nmm">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedPositiveErf</RatioRgbFuncEnum>
                 <Floor>0</Floor>
                 <Ceil>1000</Ceil>
@@ -266,6 +246,7 @@
           <Entry Key="AvgForceToToolOnToolRunningCoordinate.X">
             <FreeColorGuide QuantityKey="AvgForceToToolOnToolRunningCoordinate.X">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -275,6 +256,7 @@
           <Entry Key="AvgForceToToolOnToolRunningCoordinate.Y">
             <FreeColorGuide QuantityKey="AvgForceToToolOnToolRunningCoordinate.Y">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -284,6 +266,7 @@
           <Entry Key="AvgForceToToolOnToolRunningCoordinate.Z">
             <FreeColorGuide QuantityKey="AvgForceToToolOnToolRunningCoordinate.Z">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -293,6 +276,7 @@
           <Entry Key="AvgForceToWorkpieceOnWorkpieceCoordinate.X">
             <FreeColorGuide QuantityKey="AvgForceToWorkpieceOnWorkpieceCoordinate.X">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -302,6 +286,7 @@
           <Entry Key="AvgForceToWorkpieceOnWorkpieceCoordinate.Y">
             <FreeColorGuide QuantityKey="AvgForceToWorkpieceOnWorkpieceCoordinate.Y">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -311,6 +296,7 @@
           <Entry Key="AvgForceToWorkpieceOnWorkpieceCoordinate.Z">
             <FreeColorGuide QuantityKey="AvgForceToWorkpieceOnWorkpieceCoordinate.Z">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -320,6 +306,7 @@
           <Entry Key="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.X">
             <FreeColorGuide QuantityKey="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.X">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -329,6 +316,7 @@
           <Entry Key="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.Y">
             <FreeColorGuide QuantityKey="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.Y">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -338,6 +326,7 @@
           <Entry Key="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.Z">
             <FreeColorGuide QuantityKey="MaxTorqueToToolOnToolRunningCoordinateByKeyFulcrum_Nmm.Z">
               <RangeColorRule>
+                <!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
                 <RatioRgbFuncEnum>NormalizedErf</RatioRgbFuncEnum>
                 <Floor>-1000</Floor>
                 <Ceil>1000</Ceil>
@@ -347,26 +336,12 @@
         </ColorGuideDictionary>
       </DictionaryColorGuide>
     </FilteredColorGuide>
-  </ColorGuide>
+  </ColorGuideSource>
   <NumericalPlayerSource>
-    <FilePlayer>
-      <FilePlayee>
-        <UniversalNcFileRunner>
-          <IsReplacingDefaultSpindleSpeedbyCodeSpindleSpeed>true</IsReplacingDefaultSpindleSpeedbyCodeSpindleSpeed>
-          <EnableCutterLocationDataToStep>true</EnableCutterLocationDataToStep>
-          <EnableEmbedingGeomDataToStep>true</EnableEmbedingGeomDataToStep>
-          <EnableEmbedingForceDataToStep>true</EnableEmbedingForceDataToStep>
-        </UniversalNcFileRunner>
-      </FilePlayee>
-      <NumericalFiles>
-        <File>NC\slide.ptp.steps.csv</File>
-        <File>NC\circle.ptp.steps.csv</File>
-        <File>NC\side.ptp.steps.csv</File>
-        <File>NC\drill_slot.ptp.steps.csv</File>
-      </NumericalFiles>
-    </FilePlayer>
+    <XmlSource>csv.player</XmlSource>
   </NumericalPlayerSource>
   <DispCacheMb>260</DispCacheMb>
+  <IsShowingDimensionBar>true</IsShowingDimensionBar>
   <EnablePauseOnCollision>true</EnablePauseOnCollision>
   <EnableResetOnStart>true</EnableResetOnStart>
   <OutputPath>[OldFile].steps.csv</OutputPath>
diff --git a/fanuc.player b/fanuc.player
new file mode 100644
index 0000000..c244210
--- /dev/null
+++ b/fanuc.player
@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="utf-8"?>
+<FilePlayer>
+  <FilePlayee>
+    <TraditionalNcRunner>
+      <NcEnv>
+        <CncBrand>Fanuc</CncBrand>
+        <McHome>(0,0,0)</McHome>
+        <CoordinateTable>
+          <!--The ID is G code flag multiplying 1000. For example, ID of G54 is 54000.-->
+          <Entry ID="54000" Offset="(37.400000000000006,-97.4,-116.44)" />
+          <Entry ID="55000" Offset="(0,0,0)" />
+          <Entry ID="56000" Offset="(0,0,0)" />
+          <Entry ID="57000" Offset="(0,0,0)" />
+          <Entry ID="58000" Offset="(0,0,0)" />
+          <Entry ID="59000" Offset="(0,0,0)" />
+          <Entry ID="59100" Offset="(0,0,0)" />
+          <Entry ID="59200" Offset="(0,0,0)" />
+          <Entry ID="59300" Offset="(0,0,0)" />
+          <Entry ID="59400" Offset="(0,0,0)" />
+          <Entry ID="59500" Offset="(0,0,0)" />
+          <Entry ID="59600" Offset="(0,0,0)" />
+          <Entry ID="59700" Offset="(0,0,0)" />
+          <Entry ID="59800" Offset="(0,0,0)" />
+          <Entry ID="59900" Offset="(0,0,0)" />
+        </CoordinateTable>
+        <MillingToolOffsetTable>
+          <Entry ID="1">
+            <MillingToolOffsetTableRow>
+              <RadialIdealLen>12</RadialIdealLen>
+              <RadialWear>0</RadialWear>
+              <AxialIdealLen>50</AxialIdealLen>
+              <AxialWear>0</AxialWear>
+            </MillingToolOffsetTableRow>
+          </Entry>
+        </MillingToolOffsetTable>
+        <EnableShortestRotary>true</EnableShortestRotary>
+        <MaxRotarySpeed_rpm>60</MaxRotarySpeed_rpm>
+        <RapidFeedrate_mmdmin>20000</RapidFeedrate_mmdmin>
+        <ToolingTime_s>0</ToolingTime_s>
+      </NcEnv>
+      <NcProc>
+        <LinearResolution_mm>1</LinearResolution_mm>
+        <RotaryResolution_deg>15</RotaryResolution_deg>
+      </NcProc>
+    </TraditionalNcRunner>
+  </FilePlayee>
+  <NumericalFiles>
+    <File>NC\circle.ptp</File>
+    <File>NC\drill_slot.ptp</File>
+    <File>NC\side.ptp</File>
+    <File>NC\slide.ptp</File>
+  </NumericalFiles>
+</FilePlayer>
\ No newline at end of file