<?xml version="1.0" encoding="utf-8"?>
<GeneralXyzabcMachineTool>
  <Name>PMC_B1</Name>
  <Note></Note>
  <XyzabcChain>
    <CodeXyzabcChain>
      <ChainCode>[O][Y][X][C][w];[O][Z][B][S][t]</ChainCode>
      <IsVertical>true</IsVertical>
      <TransformerX>
        <DynamicTranslation Axis="(-1, 0, 0)" Len="0" />
      </TransformerX>
      <TransformerY>
        <DynamicTranslation Axis="(0, -1, 0)" Len="0" />
      </TransformerY>
      <TransformerZ>
        <DynamicTranslation Axis="(0, 0, 1)" Len="0" />
      </TransformerZ>
      <TransformerA />
      <TransformerB>
        <DynamicRotation Axis="(0, 1, 0)" Angle_deg="0" Pivot="(-72.4, -177.4, 225.94)" />
      </TransformerB>
      <TransformerC>
        <DynamicRotation Axis="(0, 0, -1)" Angle_deg="0" Pivot="(0, 0, 0)" />
      </TransformerC>
      <ToolBuckleTransformer>
        <StaticTranslation Trans="(-72.4, 72.4, 176.44)" />
      </ToolBuckleTransformer>
      <TableBuckleTransformer>
        <StaticTranslation Trans="(0, 0, 0)" />
      </TableBuckleTransformer>
      <AnchorToSolid>
        <Entry Key="O">
          <Solid>
            <StlFile>base.stl</StlFile>
          </Solid>
        </Entry>
        <Entry Key="Y">
          <Solid>
            <StlFile>Y.stl</StlFile>
          </Solid>
        </Entry>
        <Entry Key="X">
          <Solid>
            <StlFile>X.stl</StlFile>
          </Solid>
        </Entry>
        <Entry Key="C">
          <Solid>
            <StlFile>C.stl</StlFile>
          </Solid>
        </Entry>
        <Entry Key="Z">
          <Solid>
            <StlFile>Z.stl</StlFile>
          </Solid>
        </Entry>
        <Entry Key="B">
          <Solid>
            <StlFile>B.stl</StlFile>
          </Solid>
        </Entry>
        <Entry Key="S">
          <Solid>
            <StlFile>S.stl</StlFile>
          </Solid>
        </Entry>
      </AnchorToSolid>
    </CodeXyzabcChain>
  </XyzabcChain>
  <CollisionIndexPairs AutoGenerate="true" />
</GeneralXyzabcMachineTool>